Hi
I have Win 10 and 4 Drives:
1x SSD 500GB (Windows System)
1x HHD 3TB (Backup)
2x HHD 5TB (Data)
I need to create RAID 1 with the two 5TB drives. For this I am doing the following steps:
Go in to BIOS:
Advanced --> Sata Mode: Raid
Boot --> CSM --> Launch CSM: disabled
Advanced --> RAIDXpert2...
Hey guys, I've gotten this BSOD twice so far since upgrading to windows 10.
FAULTY HARDWARE CORRUPTED PAGE
Here's my files, help is appreciated.
Thanks in advance.
My SPECS:
I7-5820k
EVGA X99 Micro
Nvidia GTX 980 Reference GPU
32GB Mushkin DDR4-2400 (4x 8gb)
X2 Mushkin Enhanced Chronos...
Hi,
I am new to this forum, and need help with my workstation. I have an HP Z820 Workstation that came with Windows 7. I think it is set up with an SAS boot drive and 4x1TB in RAID10 array. At least that is what I think the setup is. I have it hooked up to a digital camera for a school...
I am having a problem recovering an HP ML110 G6 which is being replaced by a dell T20. I was thinking I could just use a VSS backup in the Windoes server recovery during the server 2008R2 install. The ML110 G6 has 4 drives in it. C: E: F: and :G. The new server only has a single RAID 1 Volume...
So, Asus A8N-SLI Deluxe with Silicon Image 3114 SATA Raid on motherboard...
Got everything up and running on Windows 10 x32 (x64 won't load, I think it does see enough RAM) thanks to Neemobeer.
In order to boot into Windows I must configure something on the SI RAID controller. If I don't...
asus a8n-sli
boot issues
configuration
disk size
hard drives
motherboard
neemobeer
pci device
raidraid 0
raid 1
raid 5
raid array
sata
silicon image
storage
tech support
windows 10
windows issues
x32
LS,
In a pre ReFS era, is it possible to somehow run a process(can be 3rd party software) that scans all disks (minimum of 3) in a mirror setup. If all but 1 disk have the same data then repair that 1 bad data to be similar to the others.
If more than 1 disk report some different data then...
3rd party software
automatic repair
backup solutions
corrupted data
data backup
data consistency
data integrity
data repair
disk mirroring
disk scan
disk setup
file checking
file management
file recovery
manual intervention
mirror setup
raid
refs
storage solutions
windows filesystem
I have a Windows 7 Pro X64 system which boots from a two-disk hardware RAID-1 array, operating from an Adaptec 2405 hardware-RAID controller.
I want to migrate my system and all data back to a single, new hard drive.
I use Paragon Hard Disk Manager Suite 15, which has a handy Copy Disk option...
adaptec
bios
boot issues
copy disk
data recovery
data transfer
disk copy
disk migration
external enclosure
hard drive
hardware raid
mbr
paragon
partitioning
raid
single disk
storage solutions
system backup
tech support
windows 7
hi guys
i did a raid 0 on my windows 8 [software raid not a hardware]
and my question is how much ''stripe size{4k 16K 64K}'' is use's?
becose i'm combining software raid with hardware raid
thank's in advance
Edit* - I am using Windows Server 2012 R2 Foundation
I had come accross, format my 4x 3TB ext. drive to parity space.
but i search everywhere in the Server 2012 but i didnt see any word that can let me format my hardisk to parity space.
When i go to Computer Management / Disk Management.
the...
So I have a 4 TB drive mirrored to an identical drive.
My question is, if/when a drive fails, how will I be notified? Will something popup in the system tray? Or will I get some error message or what?
I assume there is something that happens.. otherwise this software RAID would literally be...
I installed a new video card to replace my old one that did not have HDMI connections. Since that time I am getting multiple BSODs sometimes one after another other times after a few days.
The video card is an AMD Radeon R7 200 Series.
My power supply is an OCZ 500W ModXstream Pro 500.
I have...
amd r7
bsod
computer configuration
driver update
error upload
firefox
memory
power supply
raid
ssd
storage
system crash
tech support
troubleshooting
video card
windows 7
I am having random BSoD's: Mostly CRITICAL_STRUTURE_CORRUPTION (ntfs.sys) and SYSTEM_SERVICE_EXCEPTION.
System Specs are:
z86 Maximus IV Extreme-Z
i7 2600k
4x Corsair Vengeance 1600MHz
2x R9 290x gfx card
2x OCZ Vertex 3 on RAID0
1x 3TB HDD
X-Fi Titanium HD
Windows 8.1 update 1
it happens at...
Hi all,
This has been an ongoing issue for months, but it had calmed down. But now the past few days it has become very frequent again - I am now getting totally fed up with it as I don't know what it causing it.
I have a 4770k Intel
Kingston 8GB 2400mhz ram
MSI MPower Z87 Board
AMD 290X video...
Intel has released Link Removed of the SSD Toolbox, which includes a range of tools for managing the health and optimal performance of Intel Solid State Drives.
Download:
Link Removed
capacity
diagnostics
drive
firmware
health
installation
intel
management
optimization
performance
raid
smart
ssd
storage
support
system
toolbox
update
updates
windows
Hello my name is Ethan,
It is nearing the holidays and computer hardware updates are inevitable. My hard drive currently is a 500 gigabyte Seagate model and it is almost full. I am soon to receive and new 2 terabyte Seagate model. I am going to use a raid system on my motherboard to combine the...
Hi,
I believe one night my RAID driver crashed and now Windows doesn't see my array.
Some History:
One night I was trying to use Glassfish outside of Netbeans, but my website wouldn't work. So, I try to close Glassfish and went back to Netbeans because I know my site worked fine through...
ahci
amd
bios
data recovery
disk management
driver
driver update
file system
graphics card
ide
netbeans
operating system
raid
recovery
sata
storage
system crash
troubleshooting
ubuntu
windows 7
I want to remove one of the HDD's of my Raid 1 set converting it to a single drive system.
Can I do this seamlessly without a format and reloading of everything?
I need one of the drives elsewhere. I don't care about the data on it.
Windows Seven Pro
Motherboard - Gigabyte GA-EP45-UD3P
HDD's...
Windows7Forums.com uncovers a complete blowout when using 4 Crucial SSDs in a RAID-0 configuration vs. a standard Seagate Barracuda 7200 RPM hard drive. The results will amaze both the casual and experienced computer users.