I am so glad I found you guys! I've been getting random blue screens for the pass 3 months on my new system I put together myself. I ran memtest and it did not detect any errors. So I suspected it my was Sata 3 1tb Western Digital HD giving me issues. So I tested a Sata 2 WD HD in my sata 3...
I'm completely frustrated with the constant memory BSOD's and can't seem to pinpoint the problem.
I've updated the bios, checked each stick of ram, reinstalled windows, checked the ram with software, checked my hard drives, checked to see if i had bent pins but I still get these BSOD memory...
10 days ago I received a new HDD from WD after the first one failed SMART. The PCB of the new HDD had some discoloring and kinda rusty look around the screws, but installed OK and passed SMART and Disk Check with three different utilities. The problems started after I tried to run the new...
amd
antivirus
asus
bsod
call of duty
corsair
dram
drivers
g.skill
game error
hardware issues
hdd
minidump
performance
rma
smart
troubleshooting
video playback
vram
windows 7
Hello all,
Problem: I've been having a number of Blue Screens lately with the MEMORY_MANAGEMENT error. The only consistent thing that I can say about them is that they never occur while the system is idle. Also, different boots appear to be "stable" or "unstable". An unstable boot will have a...
blue screen
crash
diagnostics
disk check
error analysis
error logs
graphics card
hardware issues
memory management
memtest86
motherboard
prime95
processor
rma
smart status
stress test
system stability
temperature
voltage
Hi there pepz.
Here comes my story.
Recently i build my self a new computer have been doing this for years now, so nothing new to me.
the problems started when i when into the bios after completing the build and starting up for the first time.
i saw that the bios only found either 4080, or...
asus
bios
chassis
corsair
cpu
dominator gt
faulty equipment
graphics card
hardware issues
memory
memtest
pc build
power supply
ram
rampage iii
rma
ssd
tech support
troubleshooting
xms
Hey guys, I have a Link Removed due to 404 Error that I sent into RMA, and I was thinking when I got it back I'd replace it with my notebook's 80 GB Seagate HDD.
My question is, can I simply use the enclosure (which connects via USB) and some cloning software (such as Link Removed software)...
Okay so I have tried playing a large number of the games that I played on vista before I upgraded to Windows 7 professional 64 bit. All the games install fine with no problems but when I actually start them they all start then stop, start and stop over and over again. I can ctrl+alt+delete my...
ok so I have a GIGABYTE GA-MA78GM-US2H AM2+/AM2 AMD 780G HDMI Micro ATX AMD Motherboard It was working fine for about 2 months then stopped posting. I contacted Gigabyte's support line they said to try a few different things and listen to how many beeps the board gives but the board doesn't...
Ok, I made this post b/c I am frustrated out of my mind with this issue. I have been working on it for almost 24hrs straight now and have not made any progress. I will first describe the issue, and then I will tell you what I have done on my own to help narrow down the issue.
My system:
EVGA...
I finally got around to getting my upgraded hardware. Unfortunately I picked the absolute worst week ever to try to pull this off. I closed on my new house yesterday (Link Removed due to 404 Error Check the Final Walkthrough folder to see what it looks like finished) and am consulting for a...
A bit of a strange issue here.
I recently purchased a new laptop, and installed W7 RC7100 on it. Brought it to my friends house and my house, both of which were equipped with wireless routers running in mixed g and n modes. Internet worked fine. The touchpad on my laptop bricked after a few...
Until my 9800GTX is RMAed I am using my old Ati Radeon X1300. Unfortunately, windows doesn't appear to be aware that a display adapter is even connected. The device manager says there are no display adapters. I attached a screenshot of my monitor properties window. I simply couldn't explain it...
I am having trouble installing Windows 7 & Vista. XP Pro works fine.
On Windows 7, it installs really slowly, and then eventually (on the last item, I believe it says configuring) it says that Windows 7 is unable to configure for your software.
Windows Vista just hangs on setup.
My...
artifacts
bfg
configuration
ddr2
drivers
gigabyte
graphics card
hardware
installation
intel
motherboard
overclocking
rma
sata
setup
software
system hang
troubleshooting
windows 7
windows vista
When I originally built my current system, for the DVD RW, I opted for a 'LiteOn'. This was because I'd always found them to be good at what they did and firmware updating was a doddle. Unfortunately this particular drive was not so good. To be fair to LiteOn, I think it was just a case of...
For those of you that has followed my PSU and MoBo issues then this will come to no surprise, I have also found 3 bad sticks of RAM.
When I bought this RAM last Apr it was about $440 for 2 Gb and can now be bought at newegg for $109 after rebate. :eek:
Any way I've filled out the RMA form at...
Hey everyone. I am new here and this is my first post. I have a Vista Home Premium OEM DVD purchased online. I have this installed on my current system. I am RMA'ing my current motherboard to newegg and am trading it in for a better motherboard. From past experience, I know when I do this...
Let ask the question and then give the back ground....
I am using Vista HP 64, I have two Lite-On DVD Burners, a LH-20A1H and a SHW-160P6S. They are recognized in the BIOS and in Vista's Device Manager. Device Manager say they are "Code 39" that windows cannot load a driver, when I try to...
adata ram
bios
black edition cpu
code 39
device manager
drivers
dvd burning
folding project
hardware issues
installation
motherboard
msi
optical drive
pc build
power issues
rma
system repair
troubleshooting
vista hp 64
windows vista