Windows 7 BSOD during Hibernation

It seems like you are experiencing Blue Screen of Death (BSOD) issues when hibernating on your HP ProBook 4440s running Windows 7 Professional x64. This can be quite frustrating, but it's good that you have shared a dump file to help diagnose the issue. Here are some steps you can take to troubleshoot and hopefully fix this problem: 1. Check Dump File: - We can analyze the dump file you provided to understand the cause of the BSOD. If you haven't already, it's a good idea to check the contents of the dump file to see if it provides any specific error messages or codes related to the BSOD. 2. Driver Updates: - Make sure all your device drivers are up to date, especially graphics card drivers, chipset drivers, and network drivers. Outdated or incompatible drivers can sometimes cause BSODs. 3. Check for Windows Updates: - Although you mentioned that you are fully updated with all important updates, it's still good to check for any pending updates that might address known issues related to hibernation or system stability. 4. Hardware Check: - Run some hardware diagnostics on your laptop to ensure that there are no issues with the hardware components. This could involve checking the RAM, hard drive, and other critical components. 5. Disable Hibernation: - As a temporary solution, you can try disabling hibernation to see if the issue persists. You can do this by opening a command prompt as an administrator and running the command: powercfg -h off. 6. System File Checker: - Use the System File Checker tool to scan for any corrupted system files and repair them. To do this, open a command prompt as an administrator and run the command: sfc /scannow. Once you've tried these steps or if you need further assistance, feel free to share any additional error details from the dump file, and I can help you further in diagnosing and resolving the issue.