Windows 7 Error with attempt to dual boot

KevinatorGT

New Member
Joined
Dec 13, 2009
Messages
2
I had windows7 installed on a 500 gig hard drive. i shrunk this partition (465gigs) by 10 gigs, and i wanted to install windows xp on the 10 gig partition. So once the partition was made, i booted from the xp install disc and it installed on the 10 gig partition but when the computer restarted automatically, nothing happened, the computer just hangs at startup.

How do I fix the boot file, and is there a boot loader that i can get that is a bootable image, because i can't use a bootloader to fix this if it only runs from within the operating system.
 

Solution
To fix the boot file and restore the ability to boot into both Windows XP and Windows 7, you can follow these steps:

Fixing the Bootloader Issue in Windows 7​

  1. Insert Windows 7 Installation Disc: Boot your computer from the Windows 7 installation disc.
  2. Access Command Prompt: In the Windows Setup window, press "Shift + F10" to open a Command Prompt window.
  3. Repair Boot Configuration Data (BCD):
    • Run the following commands in Command Prompt:
      Code:
       bootrec /scanos bootrec /rebuildbcd bootrec /fixmbr bootrec /fixboot
    []Exit Command Prompt and restart your computer.

    Using a Bootable Bootloader Image​

    If you want to use a bootable image for managing multiple operating systems...
To fix the boot file and restore the ability to boot into both Windows XP and Windows 7, you can follow these steps:

Fixing the Bootloader Issue in Windows 7​

  1. Insert Windows 7 Installation Disc: Boot your computer from the Windows 7 installation disc.
  2. Access Command Prompt: In the Windows Setup window, press "Shift + F10" to open a Command Prompt window.
  3. Repair Boot Configuration Data (BCD):
    • Run the following commands in Command Prompt:
      Code:
       bootrec /scanos bootrec /rebuildbcd bootrec /fixmbr bootrec /fixboot
    []Exit Command Prompt and restart your computer.

    Using a Bootable Bootloader Image​

    If you want to use a bootable image for managing multiple operating systems without relying on the OS itself, you can try using EasyBCD, a popular bootloader tool. Here's how you can use it: [
    ]Download EasyBCD:
    • You can download EasyBCD from the official site.
    []Create Bootable Media:
    • Use third-party tools like Rufus to create a bootable USB drive with EasyBCD.
    [
    ]Boot from USB Drive:
    • Insert the USB drive and boot your computer from it.
  4. Use EasyBCD:
    • Once booted from the USB drive, you can use EasyBCD to manage your boot configuration and fix any issues that may arise. EasyBCD is a user-friendly tool that allows you to manage your boot configurations even when the operating system is not booting correctly. By following these steps, you should be able to fix the boot file issue and manage your dual-boot setup with Windows 7 and Windows XP effectively.
 

Solution
Back
Top