Windows 7 How to enable MLAA on Radeon HD 5000 series?

[kemical]

How to enable MLAA on Radeon HD 5000 series?

1. Open Regedit

2. Go to
HKEY_LOCAL_MACHINE \ SYSTEM \ ControlSet001 \ Control \ Class \ {4D36E968-E325-11CE-BFC1-08002BE10318}\000

3. Find MLF_NA change value to 0 to enable MLAA.

4.Then Reboot the PC.

 

[fugno]

I just researched what MLAA does and now I HAVE to enable it! I've never messed with my registry before but I need to do this THANKS!

 

[cybercore]

I just researched what MLAA does and now I HAVE to enable it! I've never messed with my registry before but I need to do this THANKS!

You can edit it manually or you can run a reg tweak as shown below:

Link Removed

--> To enable Morphological Antialiasing for ATI 5000 series, use the reg tweak:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E968-E325-11CE-BFC1-08002BE10318}\0000]
"MLF_NA"="0"
"SurfaceFormatReplacements_NA"="0"
"TFQ_NA"="0"

Save it as MLAA.reg, click to run and apply. Don't forget to reboot for the changes to take effect.

--> Link Removed due to 404 Error - tested on Catalyst 10.12, 10.11, 10.10. Will most likely work on future versions as well.


Link Removed - Invalid URLLink Removed - Invalid URL

 

[fugno]

Thanks guy's, I'll give it a go after work.

 

[fugno]

Well that didn't work, I'll try it manually. What do you guy's use for screen capture?

 

[Mike]

I use FRAPS and Photoshop.

 

[cybercore]

Well that didn't work, I'll try it manually. What do you guy's use for screen capture?

I too use Fraps, and also Windows scissors, HyperSnap, and Winsnap.


For the Link Removed due to 404 Error, do as follows:

1. Check if your card is ATI 5000, it has to be to support MLAA
2. Control Panel -> Programs and components -> Uninstall ALL ATI software
3. Reboot into safe mode to clear ATI registry remnants with the Driver Sweeper from Guru3D:

Link Removed

4. Download and install Catalyst 10.12, clicking on the pop-up to confirm to "Install [this unsigned] driver anyway"
5. Reboot
6. Run Link Removed due to 404 Error and confirm to apply the registry changes:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\{4D36E968-E325-11CE-BFC1-08002BE10318}\0000]
"MLF_NA"="0"
"SurfaceFormatReplacements_NA"="0"
"TFQ_NA"="0"

7. Make sure to reboot for the registry changes to take effect.

Enjoy.

Link Removed

Link Removed due to 404 Error