System Info for "...could not finish configuring the system..."
Here is some information so hopefully someone at MS can help figure out what's going on. Had the same problem on two different computers with completely different harware.
This is a problem that could affect lots of users.
Last 40 lines of C:\$WINDOWS.~BT\sources\Panther\
2009-01-25 15:35:14, Info [0x090093] PANTHR WdsEnableExit called! When group #81 is empty, execution will stop, and the queue will be saved.
2009-01-25 15:35:14, Info [0x0a0134] UI Accepting Next. Exiting Page Progress.
2009-01-25 15:35:14, Info [0x0a0035] UI Allowing Page '' to be shown
2009-01-25 15:35:14, Info [0x0a0035] UI Allowing Page '' to be shown
2009-01-25 15:35:14, Info UI Entering Page Finish.
2009-01-25 15:35:14, Info [0x0a0035] UI Allowing Page 'Drive Selection' to be shown
2009-01-25 15:35:14, Info [0x0a011c] UI WizardDialogPost::SetActive
2009-01-25 15:35:25, Info [0x0a0138] UI Accepting Finish. Exiting Page Finish.
2009-01-25 15:35:25, Info [0x090092] PANTHR WdsEnableExit already called
2009-01-25 15:35:25, Info [0x070035] DIAG CallBack_DiagnosticDataGeneration: Called with notification for SetupPhaseDone
2009-01-25 15:35:25, Warning DIAG InstallWindows: Error determining boot type.
2009-01-25 15:35:25, Info [0x070037] DIAG CallBack_DiagnosticDataGeneration: Generating perf information for phase=851975
2009-01-25 15:35:25, Info DIAG CallBack_DiagnosticDataGeneration: Phase=851975 Start time was 0X2FF8D834A, End time was 0X2FF8D883D, total time was 0X4F3
2009-01-25 15:35:25, Info [0x070042] DIAG CallBack_DiagnosticDataSend: Called with notification for SetupPhaseDone published by Engine
2009-01-25 15:35:25, Info DIAG CallBack_DiagnosticDataSend: This is End of WinPE phase and setup is NOT in WDS Mode. Skip uploading Diagnostics Data in this scenario
2009-01-25 15:35:25, Info [0x090092] PANTHR WdsEnableExit already called
2009-01-25 15:35:25, Info [0x09008e] PANTHR SeqExecute -- stopping, since termination group reached
2009-01-25 15:35:25, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2009-01-25 15:35:25, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2009-01-25 15:35:25, Info [0x090086] PANTHR pWorkerThreadFunc -- Stopping
2009-01-25 15:35:25, Info [0x0900c7] PANTHR SEQ EVENT_SERIALIZE_BEFORE_EXIT Received. Will only save modules with persistent subscriptions!
2009-01-25 15:35:25, Info [0x0900b7] PANTHR SerializeToFile: C:\$WINDOWS.~BT\Sources\Panther\MainQueueOnline0.que
2009-01-25 15:35:25, Info [0x0900b8] PANTHR Saving Main Event Queue
2009-01-25 15:35:25, Info [0x0900b9] PANTHR Saving Permanent Event Queue
2009-01-25 15:35:25, Info [0x0900c5] PANTHR Queue Serialization Succeeded
2009-01-25 15:35:25, Info PANTHR DeleteCriticalSection for pExecQueue->csLock;
2009-01-25 15:35:25, Info [0x0605a6] IBS Requested UI to hide the language and locale selection pages.
2009-01-25 15:35:25, Info [0x06010d] IBS Module_Term_Productkey: Valid product key in blackboard, show property set to hide.
2009-01-25 15:35:25, Info UI CallbackWin32UITerminate: Deleted WizardUI
2009-01-25 15:35:25, Info [0x090081] PANTHR Destroying any unreferenced modules! (SEQ6)
2009-01-25 15:35:25, Info StoreHostOSInformationOnBB: Host OS = 6.1.7000 (SP 0.0); productname = [Windows (TM) Code Name "Longhorn" Preinstallation Environment]
2009-01-25 15:35:25, Info IBS Successfully logged host OS information onto blackboard
2009-01-25 15:35:25, Info [0x0640d2] IBSLIB [Setup Disk Usage] ------ Drive C: ------
2009-01-25 15:35:25, Info [0x0640d3] IBSLIB [Setup Disk Usage] Total bytes on drive: 114431.7 MB (119990349824 bytes)
2009-01-25 15:35:25, Info [0x0640d4] IBSLIB [Setup Disk Usage] Free bytes available to user: 95516.6 MB (100156432384 bytes)
2009-01-25 15:35:25, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [BT Folder ].
2009-01-25 15:35:25, Info [0x0640d6] IBSLIB [Setup Disk Usage] Found Setup folder/file [LS Folder ].
2009-01-25 15:35:25, Info [0x0601dc] IBS Setup has completed phase 2 at 2009-01-25 15:35:25
2009-01-25 15:35:25, Info [0x090009] PANTHR CBlackboard::Close: c:\$windows.~bt\sources\panther\setupinfo.
C:\Windows\Panther\UnattendGC\setupact.log
2009-01-25 15:37:14, Info [windeploy.exe] ------------------------------------------------
2009-01-25 15:37:14, Info [windeploy.exe] WinDeploy.exe launched with command-line []...
2009-01-25 15:37:14, Info [windeploy.exe] Setup has not completed, adding pending reboot.
2009-01-25 15:37:14, Warning [windeploy.exe] SetupCl has pending operations; blocking deployment process until they've been completed.
2009-01-25 15:37:14, Error [windeploy.exe] Failure occured during online installation. Online installation cannot complete at this time.; hr = 0x8007139f
2009-01-25 15:39:13, Info [windeploy.exe] Flushing registry to disk...
2009-01-25 15:39:15, Info [windeploy.exe] Flush took 1547 ms.
2009-01-25 15:39:15, Info [windeploy.exe] WinDeploy.exe exiting with code [0x8007139f]
2009-01-25 15:40:37, Info [windeploy.exe] ------------------------------------------------
2009-01-25 15:40:37, Info [windeploy.exe] WinDeploy.exe launched with command-line []...
2009-01-25 15:40:37, Info [windeploy.exe] Setup has not completed, adding pending reboot.
2009-01-25 15:40:37, Warning [windeploy.exe] SetupCl has pending operations; blocking deployment process until they've been completed.
2009-01-25 15:40:37, Error [windeploy.exe] Failure occured during online installation. Online installation cannot complete at this time.; hr = 0x8007139f
C:\Windows\Panther\UnattendGC\setuperr.log
2009-01-25 15:37:14, Error [windeploy.exe] Failure occured during online installation. Online installation cannot complete at this time.; hr = 0x8007139f
2009-01-25 15:40:37, Error [windeploy.exe] Failure occured during online installation. Online installation cannot complete at this time.; hr = 0x8007139f
System Info:
System Information
------------------
Time of this report: 1/20/2009, 13:24:22
System Manufacturer: INTEL_
System Model: D875BZLK
BIOS: BIOS Date: 03/31/05 22:15:04 Ver: 08.00.09
Processor: Intel(R) Pentium(R) 4 CPU 2.40GHz (2 CPUs)
Memory: 1534MB RAM
Page File: 518MB used, 2911MB available
Display Devices
---------------
Card name: ALL-IN-WONDER 9800 SERIES
Manufacturer: ATI Technologies Inc.
Chip type: RADEON 9800 PRO AGP (0x4E48)
DAC type: Internal DAC(400MHz)
Device Key: Enum\PCI\VEN_1002&DEV_4E48&SUBSYS_4F721002&REV_00
Display Memory: 128.0 MB
Current Mode: 1280 x 1024 (32 bit) (60Hz)
Monitor: Plug and Play Monitor
Monitor Max Res: 1600,1200
-------------
Sound Devices
-------------
Description: SB Audigy 2 ZS Audio [B800]
Default Sound Playback: Yes
Default Voice Playback: Yes
Hardware ID: PCI\VEN_1102&DEV_0004&SUBSYS_20021102&REV_04
Manufacturer ID: 1
Product ID: 100