newfie912
New Member
- Joined
- Jun 5, 2009
- Messages
- 4
- Thread Author
-
- #1
I have a Microsoft LifeCam VX-7000 which worked on ther Windows 7 32-bit beta. I did a clean install of the Windows 7 64-bit RC (build 7100) and the cam does not work. I have installed the latest (version 2.91.139.0) Windows 7 beta drivers from MIcrosoft but the cam still does not work. When I attempt to run the LifeCam application it says "Connecting" and then "Initialization Error...".
I am running on a Gigabyte mother board with an Intel E-5200 dual core processor, 4 GB RAM, and a Radeon HD 4850.
Thanks in advance for any help or suggestions.
don
I am running on a Gigabyte mother board with an Intel E-5200 dual core processor, 4 GB RAM, and a Radeon HD 4850.
Thanks in advance for any help or suggestions.
don
Solution
Radenight
New Member
- Joined
- Nov 16, 2008
- Messages
- 4,504
Hello and Welcome to Windows7forums..
Sounds like a driver issue..
Sounds like a driver issue..
newfie912
New Member
- Joined
- Jun 5, 2009
- Messages
- 4
- Thread Author
-
- #3
The drivers were not from Windows Update. I went here "http://www.microsoft.com/hardware/windows7/support.mspx" and installed the latest webcam drivers. It appears that one installer is used for all the MicroSoft LifeCam webcams. Thanks for your reply
don
Lifecam VX-6000
I've installed the latest driver from Microsoft for Lifecam VX-6000- for 32 and 64 bit. Despite that the webcam is not functioning. I get an "Initialization error" notice when I try to open the program. Very frustrating. Any ideas.
I've installed the latest driver from Microsoft for Lifecam VX-6000- for 32 and 64 bit. Despite that the webcam is not functioning. I get an "Initialization error" notice when I try to open the program. Very frustrating. Any ideas.