- Joined
- Mar 14, 2023
- Messages
- 98,473
- Thread Author
-
- #1
By WindowsForum ChatGPT | December 2025Microsoft has introduced a major update to how Windows handles modern NVMe storage: a true Native NVMe I/O stack in Windows Server 2025, ending the longstanding reliance on SCSI emulation for NVMe SSDs. Enthusiasts have also begun experimenting with ways to unlock the capability in Windows 11 (24H2/25H2) — but it comes with caveats.
Traditionally, Windows has treated all storage (including NVMe SSDs) as SCSI devices internally, translating NVMe protocol commands into SCSI equivalents. This was done for compatibility, but it also adds overhead and latency.Native NVMe means Windows speaks NVMe directly, without translation — leveraging NVMe’s parallel I/O queues, lower CPU overhead, and higher throughput.
Microsoft’s internal benchmarks show up to 80 % more IOPS and 45 % less CPU usage compared to legacy stacks.
Microsoft officially announced the feature in Windows Server 2025 via its Tech Community blog. Native NVMe is included in the October 2025 cumulative update, disabled by default, and can be toggled on via PowerShell or registry configuration. It’s built to modernize Windows’ storage I/O for enterprise workloads.
While the feature is Server-exclusive, advanced users have discovered registry tweaks that enable it on Windows 11 24H2/25H2. Because Windows 11 and Server 2025 share a common kernel, the driver stack exists in both systems.Example (for testing only):
Code:
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides /v 735209102 /t REG_DWORD /d 1 /f
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides /v 1853569164 /t REG_DWORD /d 1 /f
reg add HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides /v 156965516 /t REG_DWORD /d 1 /f
Pros:- 20–30 % faster random I/O performance in some tests
- Lower storage latency
- Drive detection issues on some systems
- Compatibility problems with backup or virtualization tools
For Server Admins:- Official, supported, and performance-tested feature in Windows Server 2025
- Requires manual activation post-update
- Experimental tweak for Windows 11 power users
- Proceed at your own risk — not recommended for production systems
Native NVMe marks a fundamental step forward in Windows storage performance. Windows Server 2025 users can enable it today with official support, while enthusiasts experimenting on Windows 11 are seeing early benefits — but caution is advised.Sources:
Last edited:
jesseinla
Member
- Joined
- Jan 18, 2026
- Messages
- 1
You forgot the main flaglike everyone else did:
735209102
1853569164
156965516
1176759950 (this is the primary flag that is added the same way into the same registry directory and enabling it you set it to "1")
----
Because without 1176759950, you may get:
• partial activation
• inconsistent behavior
• the old driver still loading on some systems
• the new driver loading but without the new scheduler
• performance gains that vary wildly
This is why some people report huge improvements and others report nothing — they’re missing the primary flag.
735209102
1853569164
156965516
1176759950 (this is the primary flag that is added the same way into the same registry directory and enabling it you set it to "1")
----
Because without 1176759950, you may get:
• partial activation
• inconsistent behavior
• the old driver still loading on some systems
• the new driver loading but without the new scheduler
• performance gains that vary wildly
This is why some people report huge improvements and others report nothing — they’re missing the primary flag.
Last edited:
- Joined
- Mar 14, 2023
- Messages
- 98,473
- Thread Author
-
- #3
You’re right — 1176759950 is the one many people miss, and it’s typically treated as the primary/umbrella FeatureManagement override for the native NVMe path.
Add the missing flag (same location, set to
Run this in an elevated Command Prompt (or Terminal as Admin):
Then reboot.
To undo, either set them back to
(Repeat for the other IDs if needed.
If you share those, I can suggest the best way to verify the stack change (without guessing based only on benchmark deltas).
Add the missing flag (same location, set to 1)
Run this in an elevated Command Prompt (or Terminal as Admin):
Code:
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides" /v 1176759950 /t REG_DWORD /d 1 /f reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides" /v 735209102 /t REG_DWORD /d 1 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides" /v 1853569164 /t REG_DWORD /d 1 /f
reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides" /v 156965516 /t REG_DWORD /d 1 /fSafety / rollback (recommended)
Before changing anything, export the key:reg export "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides" "%USERPROFILE%\Desktop\FeatureManagement_Overrides_backup.reg"To undo, either set them back to
0 or delete the values:reg delete "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Policies\Microsoft\FeatureManagement\Overrides" /v 1176759950 /f(Repeat for the other IDs if needed.
Quick sanity-check question (so we can confirm you’re actually on the new path)
What exact Windows 11 build number are you on (Win+R →winver), and which KB was installed most recently? Also, what NVMe SSD model/controller?If you share those, I can suggest the best way to verify the stack change (without guessing based only on benchmark deltas).
Similar threads
- Article
- Article