No Internet Access / PPPoE ?'s

Discussion in 'Windows 7 Help and Support' started by callidus, Apr 16, 2012.

  1. callidus

    callidus Active Member

    Joined:
    Apr 16, 2012
    Messages:
    4
    Likes Received:
    0
    Hello all, I'm new to this forum because I am in desperate need of help. I just bought a D-Link Wireless USB Adapter (specs in ipconfig) and I cannot for the life of me get access to the internet, but the weird thing is I had access for like 10 minutes and it went back to this. I can login to my Bell 2Wire router/modem network and then i get no access. (yellow caution at wireless icon task tray in bottom right). My password encryption is set to WPA2-PSK (AES)

    Things I have tried:

    netsh in cmd
    ipconfig release/renew
    installation of software and then manual install of driver, clean un/install both times
    ipv4 manual entering of info, ip, dns, subnet etc
    disabling of ipv6
    made sure MAC of adapter is in modem/router config (192.168.2.1)
    windows fix-it utility
    restart of modem/router as well as computer
    change of channels (1,3,5,6,8,9,11)
    changing usb ports from front to back

    PC Specs/Adapter/Modem:

    gateway desktop (~2009)
    windows 7 updated
    adapter driver - 1006.3.820.2010 (date 8/20/2010)
    bell 2wire modem updated firmware
    *i get internet with ethernet plugged in, but I am way to far to use, and I have been trying with the ethernet adapter disabled/enabled*


    Here is my ipconfig /all:

    Windows IP Configuration


    Host Name . . . . . . . . . . . . : Wannop-PC
    Primary Dns Suffix . . . . . . . :
    Node Type . . . . . . . . . . . . : Hybrid
    IP Routing Enabled. . . . . . . . : No
    WINS Proxy Enabled. . . . . . . . : No
    DNS Suffix Search List. . . . . . : home


    Wireless LAN adapter Wireless Network Connection:


    Connection-specific DNS Suffix . : home
    Description . . . . . . . . . . . : D-Link DWA-121 Wireless N 150 Pico USB Ad
    apter
    Physical Address. . . . . . . . . : 1C-7E-E5-5C-8C-4C
    DHCP Enabled. . . . . . . . . . . : Yes
    Autoconfiguration Enabled . . . . : Yes
    Link-local IPv6 Address . . . . . : fe80::6433:4a47:11a9:e083%15(Preferred)
    IPv4 Address. . . . . . . . . . . : 192.168.2.29(Preferred)
    Subnet Mask . . . . . . . . . . . : 255.255.255.0
    Lease Obtained. . . . . . . . . . : Monday, April 16, 2012 8:53:13 PM
    Lease Expires . . . . . . . . . . : Thursday, April 19, 2012 8:53:14 PM
    Default Gateway . . . . . . . . . : 192.168.2.1
    DHCP Server . . . . . . . . . . . : 192.168.2.1
    DHCPv6 IAID . . . . . . . . . . . : 320634597
    DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-63-1A-2B-90-FB-A6-84-D8-7A


    DNS Servers . . . . . . . . . . . : 192.168.2.1
    NetBIOS over Tcpip. . . . . . . . : Enabled


    Tunnel adapter Teredo Tunneling Pseudo-Interface:


    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . :
    Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes


    Tunnel adapter isatap.home:


    Media State . . . . . . . . . . . : Media disconnected
    Connection-specific DNS Suffix . : home
    Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
    Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
    DHCP Enabled. . . . . . . . . . . : No
    Autoconfiguration Enabled . . . . : Yes



    Also, the signal on my 2wire modem/router sucks, and want to setup my linksys router to emit a better signal. The configuration in 192.168.2.1 in my browser is quite confusing, and am wondering what exact items i must disable in order to turn it into a 'dumb' modem? I know i must configure my linksys to use PPPoE with the login information of the 2wire and hook that up from any port on the 2wire to the 'Internet' port on the linksys. Is this correct? Also, is there anything else I have to do?

    I have been at this all day, if anyone could help I would love you forever.
     
  2. callidus

    callidus Active Member

    Joined:
    Apr 16, 2012
    Messages:
    4
    Likes Received:
    0
    solved : created static ip in ipv4 properties of wireless adapter.. i want to shoot myself now but i fixed it!!

    still need help with pppoe q though
     

Share This Page

Loading...