[SOLVED] New Win 10 Install: Memory Management BSODs.

Saaaaaad

Senior Member
#1
Hi all,

I'm having issues with a fresh Windows 10 install on a brand new system. Most of the erros are "Memory_Management" errors, but also some "IRQL_NOT_LESS_THAN_EQUAL" and PAGE_FAULT_NONPAGED_AREA" BSODs

Here are the DMP files:
https://onedrive.live.com/redir?res...00&authkey=!AOvI49008HUQCKY&ithint=folder,dmp

I've run the memory check tool, which returned no errors. Could you guys please help me out?
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
Microsoft MVP
#2
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41792, fffff6800000c138, 100000000000, 0}

Probably caused by : memory_corruption ( ONE_BIT )

Followup: MachineOwner
Hi,
most of your dump files are the same as the above. This can mean you have some faulty RAM. You say you have tested but don't say with what:
Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away (you'll see errors outlined in red.
Memtest86+ - Advanced Memory Diagnostic Tool

Also your Bios is extremely old with the latest versions having stability updates for win 10.
BaseBoardManufacturer = ASRock
BaseBoardProduct = H170M Pro4
BiosVersion = P1.00
BiosReleaseDate = 07/14/2015
ASRock > H170M Pro4
Please double check downloads and info. If your unsure on how to update the bios pay a local computer shop to do it for you.
 


Saaaaaad

Senior Member
#3
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 1A, {41792, fffff6800000c138, 100000000000, 0}

Probably caused by : memory_corruption ( ONE_BIT )

Followup: MachineOwner
Hi,
most of your dump files are the same as the above. This can mean you have some faulty RAM. You say you have tested but don't say with what:
Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away (you'll see errors outlined in red.
Memtest86+ - Advanced Memory Diagnostic Tool

Also your Bios is extremely old with the latest versions having stability updates for win 10.
BaseBoardManufacturer = ASRock
BaseBoardProduct = H170M Pro4
BiosVersion = P1.00
BiosReleaseDate = 07/14/2015
ASRock > H170M Pro4
Please double check downloads and info. If your unsure on how to update the bios pay a local computer shop to do it for you.

I've run memtest86 with no errors. I'll try updating the BIOS as you've said and report back. Thanks.
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
Microsoft MVP
#4
Hope all goes well.
 


Saaaaaad

Senior Member
#5
Alright, so since updating the BIOS, i've used the computer relatively long periods of time without a crash. It seems as though that was the issue, and its been running perfect so far.

Thank you very much for the advice.
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
Microsoft MVP
#6
Thank you for updating your thread. I hope all goes well but if not simply post back.. :)
 


This website is not affiliated, owned, or endorsed by Microsoft Corporation. It is a member of the Microsoft Partner Program.