MustafaDiaa
New Member
- Joined
- Apr 2, 2017
- Messages
- 1
- Thread Author
- #1
While I was cleaning my PC using CCleaner, I decided to delete windows.old folder. After cleaning process finished, programs never launch when I open it. I restarted the windows but it won't boot and give STOP CODE error.
Here is my Laptop Specification:
Model: Lenovo z570
CPU: intel i7-2670qm
GPU: NVIDIA Geforce gt 540m
RAM: 8GB
OS: Dual boot Ubuntu(main boot loader) & Windows 10
And here is the solutions I tried and none of them worked:
1- Startup Repair (took about 30-45 min and gives error)
2- Reset This PC (exit at 36% with "Undoing Changes" message)
3- Using Command Prompt
Thanks in advance.
Here is my Laptop Specification:
Model: Lenovo z570
CPU: intel i7-2670qm
GPU: NVIDIA Geforce gt 540m
RAM: 8GB
OS: Dual boot Ubuntu(main boot loader) & Windows 10
And here is the solutions I tried and none of them worked:
1- Startup Repair (took about 30-45 min and gives error)
2- Reset This PC (exit at 36% with "Undoing Changes" message)
3- Using Command Prompt
- chkdsk c: /r /x & sfc /scannow
- bootrec /fixmbr , bootrec /fixboot , bootrec /scanos , bootrec /rebuildbcd and it outputs: "Total identified windows installation: 0"
Thanks in advance.

Then you are most likely looking at doing a complete W10 reinstall; including REMOVING the dual-boot with your Linux. Stick with a single-boot W10 model until you can get things working again solidly in W10; then add in your Linux. Besides, Linux dual-boot doesn't work as well if you install Linux on it first and add W10 to it after.
Modern laptops, those made in...
Modern laptops are now almost all made in China and are not designed to last over 5 years for these reasons.

