Windows 8 windows 8'1 preview install problems

jhmac77

Senior Member
Joined
Oct 7, 2009
Messages
55
I have downloaded 8.1 ISO 32 bit files on two different computers and then burned them to two different DVD's. Both check out by Hash ok but both give me this code 8 . . . error in the middle of the install, something about files cannot be copied and on both computers. The drive I am installing to are empty small 20 gb but I have used this size to download trial win 8 trials before on the same two computers with no problem. Both computers seem to be compatible except maybe for one problem something about NX security in the boot,
What could be the problem?
Jim
 
Last edited by a moderator:
Solution
Ok, 1st of all Windows 8.1 is not the problem so let's stop trying call it a 'zero'. Plus, there is no charge for 8.1 nor will there be any cost for it.

And, yes, burn speeds are selectable by quite a bit. BUT, if you Rt Clk on the .ISO file & use Burn disc image, the speed used will be correct.

Just means can run the OS but, will not avail Win8's Secure Boot.

20GB drive is cutting it pretty darn close for size.... a bit small.

Anyway, I would recommend go get the .iso downloaded, again. Burn it using Burn disc image. And try again having started over from scratch.

Is you machine only x86? Is that why you are DLing x86 of Windows 8.1 rather than, a x64 version?

Cheers,
Drew
Link Removed
.1

That vid...
Hi,

System requirements are as follows:


So you should be ok on that front. How fast are you burning the iso? If it's faster than 4x then try re-burning them at that speed.
 
Last edited by a moderator:
Hi,

System requirements are as follows:



So you should be ok on that front. How fast are you burning the iso? If it's faster than 4x then try re-burning them at that speed.
What is

  • Graphics card:MicrosoftDirectX 9 graphics device with WDDM driver??? My graphics is geforce 9300mm GS 256 mb
I can't control the speed of the DVD. Never heard of that! I have all the mimimum requirements. If Microsoft wants to sell its 8.1 its hits zero so far.
 
Last edited by a moderator:
Ok, 1st of all Windows 8.1 is not the problem so let's stop trying call it a 'zero'. Plus, there is no charge for 8.1 nor will there be any cost for it.

And, yes, burn speeds are selectable by quite a bit. BUT, if you Rt Clk on the .ISO file & use Burn disc image, the speed used will be correct.

Just means can run the OS but, will not avail Win8's Secure Boot.

20GB drive is cutting it pretty darn close for size.... a bit small.

Anyway, I would recommend go get the .iso downloaded, again. Burn it using Burn disc image. And try again having started over from scratch.

Is you machine only x86? Is that why you are DLing x86 of Windows 8.1 rather than, a x64 version?

Cheers,
Drew
Link Removed
.1

That vid card you have is a bit old, and made w/ reference to Vista. But, although, a fairly low-end card if it's running Win8 ok, should, still, be ok for 8.1
 
Solution
What are your system specs for the PC you're wanting to install 8.1 on? What bit version is the current OS? What is the exact error message number being shown?
 
Link Removed

Secure boot

See also: Unified Extensible Firmware Interface#Secure boot and Link Removed

 
Last edited by a moderator:
I FIGURED AS SUCH my systems are 6 or 7 years old. hash worked. case closed.
 
Last edited by a moderator:
Apologies for not getting back to you but I see plenty jumped in with advice..
 
I have 8 preview and would like to download 8.1 preview. I can't. I try to download the ISO files but 8 shuts down my pc after an hour. If I can't download 8.1, can I download 7 and replace 8?