A refreshable braille display can make Windows Narrator useful without relying solely on speech. Setup depends on both your display and your Windows version: the traditional Narrator braille setup uses USB or a serial connection, while newer Windows 11 experiences also support compatible HID braille displays over Bluetooth.

The distinction matters. Microsoft’s Narrator guide still describes the traditional setup as USB or serial only, but Microsoft has also announced newer Windows 11 support for HID displays over USB and Bluetooth. Don’t assume that pairing any braille display over Bluetooth will make it work with Narrator.

A woman uses a braille keyboard connected to a laptop displaying accessibility and Bluetooth icons. Before you begin​

You’ll need a compatible refreshable braille display, its connection cable if using USB, and access to the PC’s Narrator settings. An internet connection is needed if Windows must download the optional braille support package.

Check Microsoft Support’s “Appendix C: Supported braille displays” for your manufacturer and model. The appendix also has device-specific Narrator commands, which are useful once the display is connected.

To get oriented:

  • Press Windows logo key + Ctrl + Enter to start or stop Narrator.
  • Press Windows logo key + Ctrl + N to open Narrator settings directly.
  • In Settings, use Tab, the arrow keys, Enter, and Spacebar to move between and operate controls.

Windows 10 note: Microsoft ended standard support for Windows 10 on October 14, 2025. Eligible devices can receive security updates through an Extended Security Updates program, but ESU is a temporary security measure rather than a source of new features.

Set up braille support with USB​

This is the documented manual setup for Narrator braille support on Windows 10 and Windows 11. Settings labels can vary between Windows versions.

  1. Connect and turn on the display. Attach it to the PC with a suitable USB data cable.
  2. Open Narrator settings with Windows logo key + Ctrl + N.
  3. Select Use a braille display with Narrator.
  4. Select Download and install braille and wait for the download to finish.
  5. Restart Windows when prompted, sign back in, and return to Narrator settings. Microsoft says the restart is required for braille to function with this setup.
  6. Open the braille settings again and turn on Turn on braille.
  7. Select Add a braille display, choose the display’s manufacturer, and choose USB as the connection type. Follow any remaining prompts.

Microsoft’s instructions specify choosing a manufacturer and connection type; they do not describe a separate model-selection field for every display. Use the supported-display appendix to verify your exact model rather than assuming it will appear in a model menu.

To test the result, start Narrator and move through a few Windows controls or open a document. The display should update as Narrator moves through the content. Consult the manufacturer-specific commands in Microsoft’s appendix for navigation and reading controls.

If the display was already working through newer HID plug-and-play support, you may not need the manual installation and manufacturer-selection steps. Microsoft describes compatible HID displays as connecting over USB without additional setup on supported Windows 11 experiences.

Connect a compatible HID display over Bluetooth​

Microsoft has announced Windows 11 support for HID-standard braille displays over Bluetooth. Its Windows 11 announcement does not establish one universal build requirement for every PC, so availability may depend on the Windows experience installed. Microsoft’s older Narrator guide describes the separate manual braille setup as USB or serial only.

If your display supports braille HID over Bluetooth and your Windows 11 installation has the newer support:

  1. Turn on the display and put it into its Bluetooth pairing mode. Follow the display manufacturer’s instructions; the controls differ by device.
  2. In Windows, open Settings > Bluetooth & devices and turn Bluetooth on.
  3. Open Devices, select Add device, and follow the prompts to pair the display.
  4. Start Narrator with Windows logo key + Ctrl + Enter, then navigate through Windows to check whether the braille cells update.

Microsoft has named the Orbit Reader 20, Orbit Slate 340, Freedom Scientific Focus 40, and APH Mantis Q40 among compatible HID displays. Check your device’s documentation for its supported connection modes.

Paired is not the same as working with Narrator. If the display pairs but produces no braille, confirm that it is using a compatible HID mode and that your Windows installation supports the newer feature. If in doubt, try the documented USB setup.

Choose braille preferences​

Once the display works, return to Narrator settings > Use a braille display with Narrator to adjust input and output preferences. Microsoft lists options for:

  • Input and output language.
  • Braille table type, including grade 1, grade 2, and eight-dot computer braille.
  • Notification duration.
  • Cursor appearance and blinking.

Choose the language and table that match how you read and enter braille. If the display responds but the text is not represented as expected, these settings are worth checking before changing hardware connections.

If Narrator does not detect the display​

Work through these checks in order:

  1. Confirm power and connection mode. Make sure the display is on and set to the appropriate USB, serial, or supported Bluetooth HID mode for your device.
  2. Check the cable and port. For USB, reconnect the cable and, if necessary, try another USB port or a known working data cable.
  3. Check the manual setup. If you installed Narrator’s braille package, confirm that you restarted Windows, turned on braille, and selected the correct manufacturer and connection type.
  4. Check compatibility. Look up the exact model in Microsoft’s supported-display appendix and consult the manufacturer’s documentation.
  5. Check Bluetooth separately. Ensure Bluetooth is on, the display is discoverable and nearby, and pairing completed. If it pairs but does not produce braille, use USB while checking HID and Windows support.
  6. Check other screen-reader drivers. If you also use JAWS, NVDA, or another screen reader, open Narrator’s braille settings and review Braille display driver. Microsoft says some configurations need the driver used by the third-party screen reader to allow switching between screen readers. Change it only when appropriate; if unsure, ask the display manufacturer.

If an older Narrator braille installation is present and the newer manual setup still fails, Microsoft documents removing Accessibility – Braille support under Settings > Apps > Optional features, then installing Narrator’s braille support again. Keep another accessible way to operate the PC available before removing an existing setup.

The goal is straightforward: Narrator focus changes should produce corresponding updates on the display. Once that works, the remaining adjustments are about making the language, braille table, and device commands fit the way you work.