To stop a shared printer from repeatedly asking for a password, check which account the printer’s host PC expects, then update the saved Windows credential on the PC you print from. On the host, verify that the printer is still shared and that the same account has Print permission. Leave Password protected sharing on. These steps apply to Windows 11 and Windows 10 PCs connecting to a printer shared by another Windows PC.
Before you change anything
- Identify the host and client. The host is the PC that has the printer installed and shares its queue. The client is the PC where you see the prompt. The host must be powered on and reachable from the client on the local network.
- Have the right account ready. You need a password for an account the host accepts for network access. You may also need the host administrator to check or change sharing and permissions. Those are separate roles: a user who only prints does not need to be an administrator.
- Check the scope. This procedure is for a Windows share such as
\\OFFICE-PC\Laser, not a printer installed directly by its own IP address, a PIN entered at the printer to release a job, or a cloud print queue. The Windows 10 paths still apply to existing installations; Microsoft ended regular support for Windows 10 version 22H2 on October 14, 2025.
1. Identify the host and the account it should accept
- Find the server name in the printer’s existing path, or ask the person who shared it. On the host, Settings > System > About > Device name shows its computer name. In
\\OFFICE-PC\Laser,OFFICE-PCis the host andLaseris the printer’s share name. If the existing path uses an IP address or a fully qualified name, note that exact address for the credential check. - Confirm the account with the host owner or IT. For a local account that exists on the host, use
HOSTNAME\username, for exampleOFFICE-PC\alex. If you’re unsure of the local username, runwhoamiin Command Prompt on the host while signed in as that account. For an Active Directory domain account, use the domain-qualified name IT provides, such asCONTOSO\alex. - Use the account’s password, not the Windows Hello PIN you use to unlock either PC. If the host owner expects you to use a Microsoft account, confirm which account is used on the host and use its password rather than assuming the client’s sign-in is the right one.
- On the client, enter
\\OFFICE-PCin the File Explorer address bar, substituting the actual host name. If Windows asks for network credentials, enter the approved username and password. If Explorer opens the host without prompting, Windows may already have a connection; that alone doesn’t tell you which account it used or whether that account can print. If Windows can’t find the host at all, check the host’s availability and sharing settings before treating it as a bad-password problem.
2. Update the saved credential on the client
- Sign in to the client as the Windows user who sees the prompt. Search the taskbar for Credential Manager, open the Control Panel result, and select Windows Credentials, not Web Credentials.
- Expand the entry that matches the host portion of the printer path. Compare the saved username with the account you confirmed in step 1. Look for the address the client actually uses: an entry for
OFFICE-PCis not the entry to edit if the connection uses a different server name or an IP address. If there’s no matching entry, that doesn’t rule out an existing connection or Windows using your sign-in credentials. - Before changing or removing an entry: Other resources on the same host, such as a mapped drive, may use it too. Save work in open network files and note the entry’s target and username. Credential Manager won’t reveal the old password, so make sure you have a working password before removing anything.
- If the target is correct and the saved password is stale, expand the entry, select Edit, enter the current password, and select Save. If the entry is for the wrong account, remove only the matching host entry and replace it. Under Windows Credentials, select Add a Windows credential. For Internet or network address, enter the host name or address only, such as
OFFICE-PC, not\\OFFICE-PC\Laser. Enter the approved username and password, then select OK. If you’d rather not save the password, remove the stale entry and supply the correct credentials when Windows prompts. - Try the host again in File Explorer. If Windows still appears to use the old account, save your work, sign out of the client, and sign back in before testing again. Editing a saved entry isn’t the same as closing an already-open network connection. You don’t need to restart the host for a client credential edit.
3. Verify sharing and Print permission on the host
- Open the properties for the actual printer queue on the host, not its installed copy on the client.
- Windows 11: Settings > Bluetooth & devices > Printers & scanners. Select the printer, then Printer properties.
- Windows 10: Settings > Devices > Printers & scanners. Select the printer, then Manage > Printer properties.
- On the Sharing tab, confirm that Share this printer is checked and that Share name matches the last part of the client path. The share name need not be the printer’s display name. If sharing was turned off and this queue is supposed to be shared, select Change Sharing Options if shown, approve the administrator prompt if required, check Share this printer, and apply the change. Don’t rename a working share to fix a password prompt: other clients may still use the old path.
- On the Security tab, check the approved user or a group that includes that user. For normal printing, the relevant permission is Print under Allow. Check whether a Deny entry applies to the user or one of their groups before adding permissions. If a restriction is intentional or managed by IT, leave it in place.
- Before changing permissions: Record the original settings. Grant access only to the approved user or print group, not to Everyone as a troubleshooting shortcut. If access is missing and you administer the host, select Add on the Security tab, select the approved user or group, and grant Allow for Print. Select Apply, then OK. You don’t need to grant permission to manage the printer or other users’ documents. To undo the change, remove only the permission entry you added or restore the original setting for the entry you edited.
- If the client couldn’t reach the host, check the host’s network sharing settings. Only enable discovery and sharing on a trusted private network, and don’t change the profile on a managed PC without approval. Note the original settings so you can restore them if the change exposes sharing you didn’t intend.
- Windows 11: Go to Settings > Network & internet > Advanced network settings > Advanced sharing settings. Under Private networks, check Network discovery and File and printer sharing. Under All networks, leave Password protected sharing on.
- Windows 10: Go to Settings > Network & Internet > Status > Network and Sharing Center > Change advanced sharing settings. Under Private, check Turn on network discovery and Turn on file and printer sharing. Under All Networks, leave Turn on password protected sharing selected. Select Save changes if you changed anything.
4. Print a test page from the client
- If the shared printer is still installed, test it before removing or reinstalling it. On the client, open Printer properties using the Windows 11 or Windows 10 path above, then select General > Print Test Page. Confirm that a page actually comes out of the intended printer and that Windows doesn’t keep asking for credentials.
- If the printer is missing, add it by its confirmed share path:
- Windows 11: In Printers & scanners, select Add device, wait for the search, then select Add manually or Add a new device manually.
- Windows 10: In Printers & scanners, select Add a printer or scanner, wait for the search, then select The printer that I want isn’t listed.
- Choose Select a shared printer by name, enter the full path, such as
\\OFFICE-PC\Laser, and select Next. If Windows asks for network credentials, use the approved account from step 1. Finish the installation and print a test page. If stale credentials were the problem, test again after signing out and back in to verify the fix survives a fresh session.
If the prompt or error returns
- Windows says another username is already connected to the host. A mapped drive or another connection to the same host can keep a different account in use. Save and close network files first, then disconnect only the affected mapping if you can reconnect it afterward, or sign out of the client and back in. Test the printer before reopening other shares on that host. If the conflict returns when a drive reconnects, ask the host administrator whether one approved account can be used for both resources.
- The host opens, but the printer says “Access is denied.” First confirm the exact share name, then check Print permission for the account you’re actually using. Opening the host in Explorer does not prove you’re authorized for that printer. If the host itself can’t print a test page, troubleshoot the host queue or physical printer first.
- The prompt asks for administrator approval during installation. This isn’t the same as a network password prompt. Microsoft’s default Point and Print behavior requires administrator privileges when a printer driver needs to be installed. Have the client administrator install the approved driver rather than weakening the policy or saving an administrator’s password as the share credential.
- Only an existing client queue still fails. Before removing it, record the share path and finish any jobs you need to keep. On Windows 11, select the printer and choose Remove; on Windows 10, choose Remove device. Restart the client, re-add the printer by its exact share path, and test again. This removes the client connection, not the shared queue on the host.
- The credential change disrupted another share, or access still fails. To recover a changed credential, edit it back or recreate the original target and username with that account’s current valid password. If neither the printer nor another authorized share on the host accepts the confirmed account, give IT the host name, printer path, exact error text, and whether the prompt occurs while opening the host, installing the printer, or printing. Do not include the password.