Prepare a fair copy test
These steps are for a USB flash drive or external drive that appears in File Explorer as a disk. They are not a reliable test for a phone transferring files through a media-transfer connection.
Before starting:
- Keep the original file on your PC. Copy it; don’t move it. Choose a non-sensitive file that you can open afterward, such as a video.
- Choose a file large enough to take measurable time to copy. Around 1–2 GB is a practical starting point. A smaller file is fine if the drive is slow or has limited space.
- Make sure the USB drive has enough free space for the test copies. Right-click the drive in This PC, select Properties, and check its free space and file system.
- If the drive uses FAT32, keep the individual test file below 4 GB. A file that exceeds the file-system limit can fail even when the drive has plenty of free space.
- If the drive uses a detachable cable, use the same cable for both port tests. Disconnect the drive from any hub or dock for the initial comparison if it can be connected directly.
- Pause other large transfers to or from the drive. Allow enough time for each copy to finish.
The procedure is substantially the same in both Windows versions. Microsoft ended standard support for most Windows 10 editions on October 14, 2025; eligible devices may receive security updates through Extended Security Updates, and some long-term servicing editions have different support dates.
Compare two USB ports with the same file
Use a stopwatch or a phone timer. The File Explorer speed display is useful for observing a transfer, but it can fluctuate; the elapsed time for the whole copy is easier to compare.
- Connect the drive to the first port. If possible, plug it directly into the PC rather than a hub or dock. Open File Explorer with Windows key + E, select This PC, and note the USB drive’s name and letter.
- Create a test folder on the USB drive. Open the drive, right-click an empty area, and select New > Folder. Name it something recognizable, such as
USB port test 1. - Copy the test file. Find the original file on your PC, right-click it, and select Copy. Open the new folder on the USB drive and paste the file. Start your timer when you initiate the paste.
- Wait for the copy to finish. Stop the timer when the copy window closes, and record the time along with the port used. If the progress window offers More details, you can expand it to watch the reported speed, but don’t use a brief peak as the final result.
- Eject the drive before changing ports. Close files and apps using it. In the taskbar notification area, select Show hidden icons if needed, then right-click Safely Remove Hardware and Eject Media. Select Eject for the drive and wait for Safe To Remove Hardware before unplugging it.
- Connect the drive to the second port. Give Windows a moment to recognize it. In File Explorer, check the drive’s name rather than assuming its letter is unchanged.
- Repeat the copy into a different folder. Create
USB port test 2on the drive. Copy the same original file from the same location on the PC into that folder, and time the transfer as before. Using a separate folder avoids replacing the first copy. - Compare the times. For the same file, the shorter elapsed time represents the faster observed copy. For example, if one port takes 80 seconds and the other takes 40 seconds, the second completed this test in half the time. Repeat the tests if the results are close or if another task was active during one run.
A port comparison is most useful when everything else stays the same. A different cable, hub, drive, source file, or removal policy can affect the result. Microsoft notes that a removal policy remains in effect when a device is reconnected to the same computer port; therefore, check the policy on each port before attributing a difference solely to the port.
USB connector shape or color alone is not a dependable way to establish the connection’s speed. If one port is consistently faster, check the PC manufacturer’s specifications for that port and use it for large transfers when practical. A faster port cannot make a slow drive write faster than the drive itself allows.
Check the drive’s removal policy
The policy applies to the external storage device, not to all USB drives at once. Microsoft says Quick removal became the default beginning with Windows 10 version 1809, but check the actual setting rather than assuming it.
- Quick removal avoids Windows disk write caching for the device. Microsoft says it permits removal without using the safe-removal process, but the drive must not be in use. Microsoft’s general advice is still to eject removable hardware to avoid data loss.
- Better performance allows Windows to cache writes. It may improve performance, but it does not guarantee a faster transfer. You must use Safely Remove Hardware before disconnecting the drive when this policy is selected.
Warning: Do not switch to Better performance unless everyone using the drive can safely eject it before unplugging it. Disconnecting it without safe removal can lose data. Power loss can also interrupt cached writes. Don’t change the separate option to turn off Windows write-cache buffer flushing.
- Leave the USB drive connected to the port you want to evaluate. Close any files stored on it and wait for transfers to finish.
- Press Windows key + R, type
devmgmt.msc, and press Enter to open Device Manager. - Expand Disk drives. Right-click the entry for the external drive and select Properties. Match the drive by its manufacturer or model; don’t select the PC’s internal disk.
- Select the Policies tab and note the current selection. If it is already Better performance, continue to eject the drive safely every time you disconnect it. If you don’t want to change the setting, select Cancel and leave it as it is.
- To test caching, select Better performance. Microsoft also recommends selecting Enable write caching on the device when using this policy, if that option is available. Select OK to apply the change. Follow any restart prompt Windows displays.
- Repeat the large-file copy on the same port, using the same source file and a new test folder. Record the time and compare it with the result for that port before the policy change. Wait for the copy to finish, then safely eject the drive.
If the Policies tab is missing, or you cannot confidently identify the drive, use the Disk Management route below instead of changing an uncertain device.
Find the policy through Disk Management
This alternative is useful when the drive’s Device Manager name does not clearly match its File Explorer name.
- In File Explorer, open This PC and note the USB drive’s letter and capacity.
- Right-click Start and select Disk Management.
- In the lower part of the window, locate the external disk by matching its volume letter and capacity. Do not select the internal system disk.
- Right-click the disk’s label in the lower pane and select Properties, then look for Policies.
- If Policies is not shown, Microsoft notes that some recent Windows versions arrange the tabs differently. Select Hardware, choose the removable drive from All disk drives, and select Properties. Look for Policies in the resulting properties window.
If the policy still isn’t available, leave the setting unchanged. The port comparison remains useful without changing it.
Verify the result and restore the original policy
After each successful copy, open the destination folder and check that the test file is present and has the expected size. Open the copy if it is a file type you can readily check. This is a basic check, not proof that every byte is identical.
For a useful final comparison, record:
- The port, cable, and whether a hub or dock was involved.
- The drive’s policy on that port.
- The file size and elapsed copy time.
- Whether safe ejection completed normally.
Cached writes can make the copy window finish before all device activity has settled. Don’t treat the moment the progress window disappears as permission to unplug a drive set to Better performance. Use Eject and wait for the safe-removal confirmation.
If Better performance provides little benefit, or you do not want the ejection requirement, return to Device Manager > Disk drives > your drive > Properties > Policies, select Quick removal, and select OK. Follow any restart prompt. Check the setting again when using another port; Microsoft only guarantees that the saved policy remains in effect when the drive is reconnected to the same port.
Once you have confirmed that the original file remains on the PC and you no longer need the test copies, delete the test folders from the USB drive. Eject the drive before disconnecting it.
Troubleshoot slow or failed tests
- One port is much faster: Use the faster port and check the computer’s documentation for its capabilities. Repeat the comparison directly on the PC if the slower result involved a hub or dock. The test identifies a useful difference, but by itself does not prove whether the port, hub, or connection caused it.
- Both ports are similarly slow: The USB drive, its cable, or the source storage may be the limiting factor. If you have another suitable data cable or another computer, try one change at a time and repeat the same test. A different drive tested on the same port can also help distinguish a drive-specific problem from a broader connection issue.
- The copy starts fast and then slows down: Use the full elapsed time rather than the initial speed. Repeat with the same file and conditions; a changing rate during one copy is not enough to identify a faulty port or prove that a policy change helped.
- The file is reported as too large: Check the USB drive’s file system in its Properties. For FAT32, choose a test file smaller than 4 GB. Do not format the drive just to run this test: formatting erases its contents.
- The drive is missing or disconnects during copying: Stop the test. Check the connection and try a different suitable port or cable. If Windows reports a device problem, open Device Manager, right-click the affected device, select Properties, and note the message under Device status. Repeated disconnects, errors, or requests to format a drive containing important files warrant a backup or recovery plan before further testing; don’t accept a format prompt as a troubleshooting step.
- Windows says the drive is in use when you try to eject: Close files and programs accessing it, close File Explorer windows displaying the drive, wait for any transfers to finish, and try Eject again. Do not unplug a drive using Better performance while Windows is still refusing safe removal. If it remains in use, shut down the PC normally and disconnect the drive after the PC has fully powered off.
- A policy option is unavailable or won’t stay selected: Confirm that you selected the external disk, then try the Disk Management route. On a work-managed PC, ask your IT administrator before changing device settings. Leave the original policy in place if the option is unavailable.
The practical result is a port and policy combination that completes repeated copies reliably. If the drive continues to disconnect, files cannot be read back, or safe ejection consistently fails, stop the speed test and investigate the connection or the drive before entrusting it with important data.