Chandler Spain
New Member
Attached is my W7F zip file, would appreciate some help 🙂
📎 AI Summary:
The thread discusses a Windows 7 forum where the original poster seeks help for a system issue. The responder analyzes a bugcheck error (BugCheck 1A), indicating a severe memory management problem likely caused by faulty RAM, and recommends running Memtest86 for thorough memory testing. The overall tone is technical and helpful, focusing on diagnosing hardware issues to resolve the problem.
The thread discusses a Windows 7 forum where the original poster seeks help for a system issue. The responder analyzes a bugcheck error (BugCheck 1A), indicating a severe memory management problem likely caused by faulty RAM, and recommends running Memtest86 for thorough memory testing. The overall tone is technical and helpful, focusing on diagnosing hardware issues to resolve the problem.
Solution
kemical
Essential Member
Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {3452, 2c38000, fffff7000108b898, ff000000ff000000}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+339a3 )
Followup: MachineOwnerBugcheck 1A means a severe memory management issue occurred and may mean you have failing RAM.
Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away (you'll see errors outlined in red.
Memtest86+ - Advanced Memory Diagnostic Tool
Please post any new dump files