Monitor not detecting graphics card after recent update W11

Start with the simple checks​

1. Try a different DisplayPort cable
   • Use a certified DP 1.4/2.0 cable if possible.
   • Avoid very long cables or cheap adapters.
   • A flaky DP cable can cause exactly this: random “no signal” while the PC keeps running.
2. Try a different port
   • Move the cable to another DisplayPort output on the graphics card.
   • If the monitor has multiple DP inputs, try another input there too.
3. Test HDMI if available
   • This helps determine whether the problem is DisplayPort-specific or GPU/driver-wide.
4. Check whether the PC is actually crashing
   • When the monitor loses signal, press Win + Ctrl + Shift + B.
   • This resets the graphics driver.
   • You should hear a beep and the display may come back.
   • If that works, it strongly points to a graphics driver/display stack issue rather than the monitor itself.

Check Windows logs​

1. Open Reliability Monitor
   • Press Win + R
   • Type:
     perfmon /rel
   • Press Enter.
2. Look for red X errors around the time the display/audio crash happened.
3. Also check Event Viewer
   • Press Win + X
   • Open Event Viewer
   • Go to:
     Windows Logs > System
   • Look for errors involving:
     
     Code:

     Display
     nvlddmkm
     amdkmdag
     igfx
     Kernel-Power
     LiveKernelEvent
     WHEA-Logger

Do a clean graphics driver reinstall​

1. Create a restore point first.
   • Press Win + R
   • Type:
     SystemPropertiesProtection
   • Press Enter.
   • Choose Create.
2. Download the latest driver directly from NVIDIA/AMD/Intel, depending on your GPU.
3. Download DDU - Display Driver Uninstaller.
4. Boot into Safe Mode.
5. Run DDU and remove the current GPU driver.
6. Reboot normally.
7. Install the freshly downloaded GPU driver.
8. During install, choose Clean installation if available.

Change power/display settings​

1. Open Control Panel.
2. Go to:
   Power Options > Change plan settings > Change advanced power settings
3. Set:
   PCI Express > Link State Power Management > Off
4. In Windows Settings, go to:
   System > Display > Graphics > Default graphics settings
5. Temporarily disable:
   Hardware-accelerated GPU scheduling
6. Reboot and test again.

Check gaming-related causes​

1. Temporarily disable G-Sync, FreeSync, or Adaptive Sync.
2. If you are using HDR, temporarily turn off HDR.
3. Cap the game FPS slightly below your monitor refresh rate.
4. Watch GPU temperature while gaming using something like HWiNFO, GPU-Z, MSI Afterburner, or AMD/NVIDIA overlay.
5. If the GPU is overclocked, undervolted, or using a custom tuning profile, return it to stock.

Information that would help​

1. Your GPU model.
2. Your monitor model.
3. Your Windows 11 version/build:
   winver
4. Your graphics driver version.
5. Whether the audio output is through the monitor/DisplayPort, HDMI, USB headset, or motherboard audio.
6. Whether the PC keeps running when the screen goes black, or if the whole system freezes/restarts.
7. Any Reliability Monitor error names, especially LiveKernelEvent codes.

datawizard0103 said:

Since both the DisplayPort signal and audio crash at the same time this points more to the GPU briefly crashing than the monitor. I’d swap the DisplayPort cable first and turn off Hardware Accelerated GPU Scheduling in Windows because it can cause random gaming black screens even with updated drivers. Also check Event Viewer after a crash for a display driver error since that usually confirms it fast.

Click to expand...