📎 AI Summary:
The thread discusses issues with a Windows 8 installation on an HP Envy 15t-3200 with an aftermarket SSD, where the laptop crashes or blue screens after sleep mode. The original poster identifies a "CRITICAL_PROCESS_DIED" error and questions whether an unknown device in Device Manager (likely the Intel Management Engine) might be related. Contributors suggest checking driver compatibility, adjusting power management settings, and disabling features like hibernate to resolve the crashing problems.

Adam Hartstein

New Member
Member details
Joined
Nov 1, 2012
Messages
3
Thread Author #1
I have an HP Envy 15t-3200, with an after market Vertex 4 256GB SSD. I did a clean install of Windows 8, and now when I close my lap top it goes to sleep like normal, but when I open it back up it will either freeze and just restart or blue screen. Any help would be great.
 

Saltgrass

Excellent Member
Microsoft Community Contributor
Member details
Joined
Oct 16, 2009
Messages
15,153
Did you ever run Windows 8 on the system before the SSD?

If you have a network adapter, you might check to make sure the driver is identifying it correctly, and try adjusting the Power Management in its properties in Device Manager. I just say this because Windows 8 gave me problems with my Ethernet adapter, so it might be similar to your situation.

If you have any more info, someone might notice other things. Any log entries in Event Viewer?
 

Adam Hartstein

New Member
Member details
Joined
Nov 1, 2012
Messages
3
Thread Author #3
Did you ever run Windows 8 on the system before the SSD?

If you have a network adapter, you might check to make sure the driver is identifying it correctly, and try adjusting the Power Management in its properties in Device Manager. I just say this because Windows 8 gave me problems with my Ethernet adapter, so it might be similar to your situation.

If you have any more info, someone might notice other things. Any log entries in Event Viewer?

Yes I did, but I formatted the SSD before installing.

I looked in the Device Manager and this is what I found. I didn't have anything plugged in my computer, I don't know what that unknown device is, maybe that's the problem?
And I have bluetooth, wireless adapters, and Ethernet Port, I am not that good with device manager so you'll have to tell me which one i need to adjust.
http://i.imgur.com/2wOaU.png


I've only been able to catch what the problem is when it blue screens for a few seconds, but I think is said critical_read_process, but not entirely sure.
 

Saltgrass

Excellent Member
Microsoft Community Contributor
Member details
Joined
Oct 16, 2009
Messages
15,153
The Unknown device might be the Intel Management Engine. There is a driver for it, but it should not cause blue screens.

You might see if there is a BSOD forum here, or go to the one on the Link Removed. You will find a sticky that explains what might be required for someone to diagnose the problem.
 

Adam Hartstein

New Member
Member details
Joined
Nov 1, 2012
Messages
3
Thread Author #5
The Unknown device might be the Intel Management Engine. There is a driver for it, but it should not cause blue screens.

You might see if there is a BSOD forum here, or go to the one on the Link Removed. You will find a sticky that explains what might be required for someone to diagnose the problem.

It just happened again this time I was able to read it. The reason was CRITICAL_PROCESS_DIED

I can provide memory dump files if that will help.
 

davehc

Essential Member
Premium Supporter
Member details
Joined
May 1, 2008
Messages
5,546
Well, you are luckier than I! I am still trying to find a way to even install Windows 8 on my HP Envy 15!!But. Have you tried adjusting some of the power functions? Try disabling the hibernate feature, for a start, and see if that brings any results. Also, in the Power menu, select the option which does not allow your HD to sleep.