BSOD at least 3x's a day randonmly

Discussion in 'Windows 8 Blue Screen of Death (BSOD)' started by Daniiwayy, May 14, 2014.

  1. Daniiwayy

    Daniiwayy New Member

    May 14, 2014
    Likes Received:
    Last Christmas my dad had the idea of custom making me a PC and ever since the first day I turned it on its had the BSOD. The main error that pops up is "Page Fault In NonPaged Area" but I also get "Memory Management" a fair amount too. We took the PC into a computer shop to get it checked out and upon recieving it they said the only problem was that the memory stick we had was faulty. I thought they would need to actually log onto the computer to see the problem but from what my dad said, "apparently they didn't need to." After getting it back the problem still persisted. The computer crashes at LEAST (if I'm lucky) 3 times a day but can and often does more. Just a few moments ago it crashed and for the first time I've seen, an error came up saying "DPC Watchdog Violation". I've tried updating the drivers for everything but either I haven't found the correct driver or that's not the issue. I'm also thinking it has something to do with the amount of memory I have but again I'm not sure. Thank you in advance.

    RAMMon v1.0 Build: 1012 built with SysInfo v1.0 Build: 1049
    PassMark (R) Software -

    Number of Memory Devices: 2 Total Physical Memory: 12251 MB (12288 MB)
    Total Available Physical Memory: 9421 MB
    Memory Load: 23%

    ItemSlot #1Slot #2Slot #3Slot #4
    Ram Type DDR3 DDR3 Not Populated Not Populated
    Maximum Clock Speed (MHz) 666.67 (JEDEC) 666.67 (JEDEC)
    Maximum Transfer Speed (MHz) DDR3-1333 DDR3-1333
    Maximum Bandwidth (MB/s) PC3-10600 PC3-10600
    Memory Capacity (MB) 8192 4096
    Jedec Manufacture Name Mushkin G Skill Intl
    Search Search! Search!
    SPD Revision 1.1 1.0
    Registered No No
    ECC No No
    DIMM Slot # 1 2
    Module Part # 992018 (997018) F3-10666CL9-4GBNT
    Module Revision 0x0 0x0
    Module Serial # 0x0 0x0
    Module Manufacturing Location 0 0
    # of Row Addressing Bits 16 15
    # of Column Addressing Bits 10 10
    # of Banks 8 8
    # of Ranks 2 2
    Device Width in Bits 8 8
    Bus Width in Bits 64 64
    Module Voltage 1.5V 1.5V
    CAS Latencies Supported 5 6 7 8 9 10 6 7 8 9
    Timings @ Max Frequency (JEDEC) 9-9-9-24 9-9-9-24
    Maximum frequency (MHz) 666.67 666.67
    Maximum Transfer Speed (MHz) DDR3-1333 DDR3-1333
    Maximum Bandwidth (MB/s) PC3-10600 PC3-10600
    Minimum Clock Cycle Time, tCK (ns) 1.500 1.500
    Minimum CAS Latency Time, tAA (ns) 13.125 13.125
    Minimum RAS to CAS Delay, tRCD (ns) 13.125 13.125
    Minimum Row Precharge Time, tRP (ns) 13.125 13.125
    Minimum Active to Precharge Time, tRAS (ns) 36.000 36.000
    Minimum Row Active to Row Active Delay, tRRD (ns) 6.000 6.000
    Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) 49.125 49.125
    Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) 260.000 160.000
    DDR3 Specific SPD Attributes
    Write Recovery Time, tWR (ns) 15.000 15.000
    Internal Write to Read Command Delay, tWTR (ns) 7.500 7.500
    Internal Read to Precharge Command Delay, tRTP (ns) 7.500 7.500
    Minimum Four Activate Window Delay, tFAW (ns) 30.000 30.000
    RZQ / 6 Supported Yes Yes
    RZQ / 7 Supported Yes Yes
    DLL-Off Mode Supported Yes Yes
    Maximum Operating Temperature Range (C) 0-95 0-95
    Refresh Rate at Extended Operating Temperature Range 2X 2X
    Auto-self Refresh Supported Yes Yes
    On-die Thermal Sensor Readout Supported No No
    Partial Array Self Refresh Supported No No
    Thermal Sensor Present No No
    Non-standard SDRAM Type Standard Monolithic Standard Monolithic
    Module Type UDIMM UDIMM
    Module Height (mm) 30 30
    Module Thickness (front), (mm) 2 2
    Module Thickness (back), (mm) 2 2
    Module Width (mm) 133.5 133.5
    Reference Raw Card Used Raw Card B Rev. 0 Raw Card B Rev. 0
    DRAM Manufacture ID 32812 1229
    # of DRAM Rows 0 0
    # of Registers 0 0
    Register Manufacturer
    Register Type
    Register Revision 0 0

    Attached Files:

  2. kemical

    kemical Windows Forum Admin
    Staff Member Premium Supporter Microsoft MVP

    Aug 28, 2007
    Likes Received:
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    Use !analyze -v to get detailed debugging information.
    BugCheck 1A, {5003, fffff79940000000, 379, 1037c00206fc}
    Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+6327 )
    Followup: MachineOwner
    you have quite a few different dump files which in itself can point to a hardware issue. Many are memory related and after the shop assistant explained about the defective RAM did you test or replace the RAM?

    BiosVersion = F7
    BiosReleaseDate = 03/23/2012
    Your bios has updates pending please update the bios. Your motherboard has quite a few different versions so please ensure you have the correct page for your version. The version or 'Revision' number will be printed on the actual motherboard. It is critical that you ensure you have the correct download for your board. I've posted the page for Revision 2.0 but as I wrote please do check.

    avgldx64.sys Thu Mar 27 20:07:07 2014: AVG AV is known for causing issues from time to time and indeed does appear in one of the dumps. Please remove and install MSE as this creates a more stable environment:

    HECIx64.sys Wed Oct 20 00:33:43 2010: Intel Management Engine Interface please update:

    If after making the above changes you still get a bsod then please download and run Memtest86. You can get the latest version here:
    This guide although a little old explains how best to use it:

    Please post any new dump files

Share This Page