BSOD every day

Hi all, i need yor help:

I get at least 1 BSOD per day and cant figure out what's the problem.

W7F Diagnostic Tool logs are atached.

Thank you very much.



Windows Forum Admin
Staff member
Premium Supporter
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *

Use !analyze -v to get detailed debugging information.

BugCheck 7F, {d, 0, 0, 0}

Unable to load image \SystemRoot\system32\drivers\ADIHdAud.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ADIHdAud.sys
*** ERROR: Module load completed but symbols could not be loaded for ADIHdAud.sys
Probably caused by : ks.sys ( ks!KspPropertyHandler+28b )

Followup: MachineOwner
your dmp files have also pointed to memory corruption as well as the above which is an audio driver. Either could be the cause or even something else so we'll do some troubleshooting and see where we are after:

BiosVersion = 0610
BiosReleaseDate = 06/06/2008
Your bios is extremely old and needs updating....... Please download your motherboard manual (if you don't have it) and you'll see a number of ways to update the bios.

ADIHdAud.sys Thu May 21 09:22:07 2009:
This is the onboard sound driver and there are no further updates for it. If this also becomes an issue one solution was to try the vista driver.

atikmdag.sys Fri Nov 16 20:14:03 2012:
Please update your gpu drivers: 7 - 32

cpuz132_x32.sys Thu Mar 26 23:16:27 2009:
Update to the latest CPU-Z:

CVPNDRVA.sys Tue Mar 23 19:15:34 2010:
Cisco Systems VPN Client please update if possible:

I notice some drivers are missing. If you use your motherboards website as a guide to which drivers you need. You can then google for the latest versions.

You could also try running a system file check just to make sure nothing is corrupted file wise. Find command prompt in the start menu, right click on it, choose properties and click run as admin. Type:
sfc /scannow
Press enter and await results.

As we've also seen memory corruption mentioned please run memtest86:

Please post any new dmp files..

Last edited:
This website is not affiliated, owned, or endorsed by Microsoft Corporation. It is a member of the Microsoft Partner Program.