Windows 7 BSOD !!! ...i'm soo tierd :(

Hi -

The bugcheck on the Feb 1 dump = 0x124 = WHEA = Machine Check Exception

WHEA = Windows Hardware Error Architecture

The WHEA record:
Code:
[FONT=Lucida Console]3: kd> [B]!errrec fffffa80062e28f8[/B]
===============================================================================
Common Platform Error Record @ fffffa80062e28f8
-------------------------------------------------------------------------------
Record Id     : 01ce0001b5ef57a6
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 1/31/2013 22:24:35
Flags         : 0x00000002 PreviousError

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ fffffa80062e2978
Section       @ fffffa80062e2a50
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : BUS error
Operation     : Generic
Flags         : 0x00
Level         : 0
CPU Version   : 0x000000000001067a
Processor ID  : 0x0000000000000000

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ fffffa80062e29c0
Section       @ fffffa80062e2b10
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000000
CPU Id        : 7a 06 01 00 00 08 04 00 - 9d e3 08 0c ff fb eb bf
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0  @ fffffa80062e2b10

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa80062e2a08
Section       @ fffffa80062e2b90
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : [COLOR="#FF0000"]BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)[/COLOR]  
Status      : [COLOR="#FF0000"]0xf200084000000800[/COLOR][/FONT]

This is a hardware problem. If you scroll to end of code box, you'll see -
Code:
BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)

Vir Gnarus gives us the detailed explanation:

Vir Gnarus said:
Error : BUSL0_SRC_ERR_M_NOTIMEOUT_ERR (Proc 0 Bank 0)
Status: 0xf200084000000800

In this example, the error is BUSL0_SRC_ERR_M_NOTIMEOUT_ERR, which means that the L0 cache memory on a processor suffered a generic non-timeout-related error while something was trying to access data in it. The source of the requested operation was the processor itself. This helpfully provides the exact processor number (Proc 0) and memory bank (Bank 0) for multi-core/multi-cpu systems to further diagnose.

To decipher the mnemonics presented in the error message, consult the CPU developer manual associated with the CPU installed in the offending system. For Intel CPUs, it's in Intel 64 and IA-32 Architectures Software Developer's Manual Volume 3: System Programming Guide (for 64-bit of course), and the tables for the mnemonics are located in section 15.9.2 (that's chapter 15, section 9, subsection 2). While Intel and AMD CPUs present their errors differently, typically the mnemonics are the same.

http://www.sysnative.com/forums/bso.../284-blue-screen-death-method-tips.html#_WHEA

The dumps can never tell us the exact piece of hardware that is/has failed, but can give a possible direction. CPU is the most obvious place to start if you wish to keep the system.

Regards. . .

jcgriff2
 
wow so the CPU is good to go? :(
it's the best part... is a quad core 2.5GHz...

Thx allot for the time u took to look at my problem. Is there anything else u wold like to add? :D
 
IMAG0345.jpg
I have 3 x 2 gb ram and I just tested them with memtest 86.
First ram memory: was tested 3 times and passed, in one slot and then I left it in another slot over night and it passet 14 times.
Second ram memory: passed 3 times
Third ram memory: passed 3 times
Then i tested all 3 at once and you can see the result in the picture.
Please tell me what should I do next.
Thank you.
 
You did the hard drive test - and it passed
You did the memory test - and it passed

What about:
- Antimalware
- Prime95
- Video Test 1 (Furmark)
- Video Test 2 (4 tests)
- CPU Stress Tests

Link to all: Hardware Diagnostics
 
Thx allot for the indications.
I just finished the FurMark tests:
Burn in test went well, i let it run for 30min and my gpu was at 87C max temp then lowerd to 84
Benchmark present 720: passed with temp at 67C
Benchmark present 1020:
1st try failed with No signal on my monitor
2nd try passed
Burn in benchmark, 1920x1080:
1st try No signal
2nd try No signal at about 70%
and 3rd try passed

This No signal message on the monitor it's an old problem that made me change the old gpu with this new one (GeForce GTS 450) but the message didn't go away. No signal still comes up and freezes my pc.
 
While not really bad, 87ºC isn't all that good. Check the cooling on your video card (to include the airflow to the card).

Let's see what the other tests show us.
 
While not really bad, 87ºC isn't all that good. Check the cooling on your video card (to include the airflow to the card).

Let's see what the other tests show us.

i don't thing the cooling is the problem, i get errors like "Display driver stopped responding and has recovered" or BSOD etc etc..and the video card is not hot.
Just finished the CPU test:

--- IPDT64 - rev 1.24.0.0 ---
--- Start Time: 02/06/2013 18:34:00---
--- Skipping Config ---
--- Reading CPU Manufacturer ---
Expected --> GenuineIntel
Detected --> GenuineIntel
Found --- Genuine Intel Processor ---

--- Temperature Test ---

Temperature Test Passed!!!

Temperature = 64 degrees C below maximum.

--- Reading Brand String ---
Detected Brand String:
Intel Core2 Quad Q8300 2.50GHz

Brand String Test Passed!!!


--- Reading CPU Frequency ---
Expected CPU Frequency is --> 2.50
Detected CPU Frequency is --> 2.54082
CPU Frequency Test Passed!!!

--- Reading FSB ---
Expected FSB : --> 1333
Detected) FSB : --> 1333
CPU FSB Test Passed!!!

--- Running Base Clock test ---
--- This CPU does not support base clock test ---
--- Running Floating Point test ---

Million Floating Points per Second, MFLOPS --> 288
Floating Point Test Pass ---

--- Running Prime Number Generation Test ---
Operation Per Second--> 664579
Prime Number Generation Test Pass ---

--- Reading Cache Size ---
- Detected L1 Data Cache Size --> 4 x 32
- Detected L1 Inst Cache Size --> 4 x 32
- Detected L2 Cache Size --> 4096
- Detected L3 Cache Size --> Not Detected.

Cache Size Test Passed!!!
--- Determining MMX - SSE capabilities ---
--- CPU FEATURES DETECTION FOR ---
--- MMX SSE ---
MMX - MMX Supported --> Yes
SSE - SSE Supported --> Yes
SSE2 - SSE2 Supported --> Yes
SSE3 - SSE3 Supported --> Yes
SSSE3 - SSSE3 Supported --> Yes
SSE4.1 - SSE4.1 Supported --> Yes
SSE4.2 - SSE4.2 Supported --> No
--- MMX SSE - capabilities check complete ---
MMX Test Result --- PASS
SSE Test Result --- PASS
SSE2 Test Result --- PASS
SSE3 Test Result --- PASS
SSSE3 Test Result --- PASS
SSE4.1 Test Result --- PASS
SSE4.2 Test Result --- Not Tested
MMX SSE Testing Passed !!
--- Determining AVX AES PCLMULQDQ capabilities ---

--- CPU FEATURES DETECTION FOR ---
--- AVX/AES/PCLMULQDQ ---
AVX - Advanced Vector Extensions Supported --> No
AVX OS Support - AVX Operating System Supported --> No ---> No Test Required
AES - Advanced Encryption Standard Supported --> No ---> No Test Required
PCLMULQDQ - Polys Carry-Less Multiply Supported --> No ---> No Test Required
--- AVX AES PCLMULQDQ capabilities check complete ---

AVX Compare Test Result --- Not Tested
AES Test Result --- Not Tested
PCLMULQDQ Test Result --- Not Tested
No AVX AES PCLMULQDQ Tests required

--- IMC NOT Supported on this Processor ---

..Platform Controller Hub Test not supported curent chipset..
..Skipping Platform Controller Hub Test..

Skipping Platform Controller Hub Test
..
..Query 4..
..
--- Querying for Intel(R) Integrated Graphics Device (IGD) ---
..Intel(R) Integrated Graphics Device not supported on this processor..
..Skipping Intel(R) Integrated Graphics Device Presence Test..
..

--- CPU Load ---
--- Load Level = 8
CPU Load Passed!!!

--- Temperature Test ---
Temperature Test Passed!!!
Temperature = 52 degrees C below maximum.


--- Test End Time: 02/06/2013 18:37:59---

////

while writing this post i got another bsod:
IRQL_NOT_LESS_OR_EQUAL
STOP: 0x0000000A

Thx again for your help ! :)
 
Last edited:
Open up the case and point a house fan into it.
See if that decreases the frequency of the BSOD's
 
soo...my system is working worse and worse. i tryed the thing with the fan, and as I sayed, not a cooling problem. I get BSOD's every 10min. i really can't do anything now...:(

thx anyway for trying to help me, if u have any more ideeas i'll be glad to try them.
 
the bsod's are not even the same.
i just got another 1:
SYSTEM_SERVICE_EXCEPTION; STOP: 0x3B

and earlier was: PAGE_FAULT_INNONPAGED_AREA; STOP:0x50
 
Back
Top Bottom