BSOD on new computer I built..

Discussion in 'Windows 7 Blue Screen of Death (BSOD)' started by kskwerl, Jul 23, 2010.

  1. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    Ok I'm going to give you guys the most details I can so first here is my system.

    CORSAIR CMPSU-850TX 850W ATX12V 2.2 / EPS12V 2.91 SLI Ready CrossFire Ready Active PFC Power Supply

    AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz Socket AM3 125W Six-Core Desktop Processor HDT90ZFBGRBOX

    GIGABYTE GA-890FXA-UD5 AM3 AMD 890FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard

    Scythe SCKTN-3000 92mm Sleeve "KATANA3" 3Heat Pipes CPU Cooler

    G.SKILL 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory Model F3-12800CL9T-6GBNQ

    OCZ Agility 2 OCZSSD2-2AGTE60G 2.5" 60GB SATA II MLC Internal Solid State Drive (SSD)

    XFX HD-487A-ZWFC Radeon HD 4870 1GB 256-bit GDDR5 PCI Express 2.0 x16 HDCP Ready CrossFireX Support Video Card

    I also have another XFX HD 4870 which is in crossfire with the new card which is the one above.

    Here a picture: The older XFX HD 4870 is the one on top, the new one is on bottom.

    Ok so that's my setup.

    I looked through event viewer and this is the error, now I don't know much about his stuff so this is where I'm hoping you guys are gonna come in clutch.

    This is some atikmdag error and I inserted a picture of this in event viewer and it's happening a real lot.

    Log Name: System
    Source: atikmdag
    Date: 7/23/2010 3:38:16 PM
    Event ID: 43029
    Task Category: DAL
    Level: Error
    Keywords: Classic
    User: N/A
    Computer: ErichTaylor-PC
    Description:
    Display is not active
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="atikmdag" />
    <EventID Qualifiers="49152">43029</EventID>
    <Level>2</Level>
    <Task>42</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-23T19:38:16.519172700Z" />
    <EventRecordID>6982</EventRecordID>
    <Channel>System</Channel>
    <Computer>ErichTaylor-PC</Computer>
    <Security />
    </System>
    <EventData>
    <Data>
    </Data>
    <Binary>00000000010000002A00000015A800C0000000000000000000000000000000000000000000000000</Binary>
    </EventData>
    </Event>

    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------
    Here's another:

    Log Name: System
    Source: Microsoft-Windows-DriverFrameworks-UserMode
    Date: 7/23/2010 2:19:36 AM
    Event ID: 10110
    Task Category: User-mode Driver problems.
    Level: Critical
    Keywords:
    User: SYSTEM
    Computer: ErichTaylor-PC
    Description:
    A problem has occurred with one or more user-mode drivers and the hosting process has been terminated. This may temporarily interrupt your ability to access the devices.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-DriverFrameworks-UserMode" Guid="{2E35AAEB-857F-4BEB-A418-2E6C0E54D988}" />
    <EventID>10110</EventID>
    <Version>1</Version>
    <Level>1</Level>
    <Task>64</Task>
    <Opcode>0</Opcode>
    <Keywords>0x2000000000000000</Keywords>
    <TimeCreated SystemTime="2010-07-23T06:19:36.108555300Z" />
    <EventRecordID>6760</EventRecordID>
    <Correlation />
    <Execution ProcessID="1012" ThreadID="1124" />
    <Channel>System</Channel>
    <Computer>ErichTaylor-PC</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <UserData>
    <UMDFHostProblem lifetime="{C9035378-BC33-4126-9F20-13312B83AA03}" xmlns:auto-ns2="http://schemas.microsoft.com/win/2004/08/events" xmlns="http://www.microsoft.com/DriverFrameworks/UserMode/Event">
    <Problem code="3" detectedBy="2">
    </Problem>
    <ExitCode>3</ExitCode>
    <Operation code="259">
    <Message>72448</Message>
    <Status>4294967295</Status>
    </Operation>
    </UMDFHostProblem>
    </UserData>
    </Event>

    -----------------------------------------------------------------------------------------------------------------------------------------------------------------------

    I did some research on the last error and it seems other people get his error with a BSOD.

    Anything else you guys need to know to help me just lemme know. Thanks in advance for any help.
     

    Attached Files:

  2. Captain Jack

    Captain Jack Extraordinary Member

    Joined:
    Mar 6, 2010
    Messages:
    1,952
    Likes Received:
    139
  3. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
    Yes, please post the crash dumps.

    What may actually be causing the bsods though are your 2 Crossfire bridges. Only one should be connected between the two cards. Please remove one of them and test for now.
     
  4. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    Thanks, i'm working on retrieving the crash dumps as this is a first time doing so. Which bridge should I remove the one to he left or right?
     
  5. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    Microsoft (R) Windows Debugger Version 6.12.0002.633 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.


    Loading Dump File [C:\Users\Erich Taylor\Desktop\072010-15085-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available

    Symbol search path is: SRV*C:\Symbols*Symbol information
    Executable search path is:
    Windows 7 Kernel Version 7600 MP (6 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7600.16539.amd64fre.win7_gdr.100226-1909
    Machine Name:
    Kernel base = 0xfffff800`0341b000 PsLoadedModuleList = 0xfffff800`03658e50
    Debug session time: Tue Jul 20 19:57:31.033 2010 (UTC - 4:00)
    System Uptime: 3 days 18:24:16.891
    Loading Kernel Symbols
    ...............................................................
    ................................................................
    ............................................
    Loading User Symbols
    Loading unloaded module list
    ........................
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    Use !analyze -v to get detailed debugging information.

    BugCheck 50, {fffffa800e8db000, 0, fffff880083e89f5, 0}


    Could not read faulting driver name
    Probably caused by : usbaudio.sys ( usbaudio!memmove+c5 )

    Followup: MachineOwner
    ---------

    3: kd> !analyze -v
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: fffffa800e8db000, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff880083e89f5, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 0000000000000000, (reserved)

    Debugging Details:
    ------------------


    Could not read faulting driver name

    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800036c30e0
    fffffa800e8db000

    FAULTING_IP:
    usbaudio!memmove+c5
    fffff880`083e89f5 488b440af0 mov rax,qword ptr [rdx+rcx-10h]

    MM_INTERNAL_CODE: 0

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    BUGCHECK_STR: 0x50

    PROCESS_NAME: audiodg.exe

    CURRENT_IRQL: 0

    TRAP_FRAME: fffff88007bcf560 -- (.trap 0xfffff88007bcf560)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=0000000000000000 rcx=fffff8800c138fd0
    rdx=00000200027a203a rsi=0000000000000000 rdi=0000000000000000
    rip=fffff880083e89f5 rsp=fffff88007bcf6f8 rbp=fffffa800e8d5258
    r8=0000000000000372 r9=0000000000000004 r10=0000000000000000
    r11=fffff8800c138cd0 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei ng nz na pe nc
    usbaudio!memmove+0xc5:
    fffff880`083e89f5 488b440af0 mov rax,qword ptr [rdx+rcx-10h] ds:0001:fffffa80`0e8daffa=????????????????
    Resetting default scope

    LAST_CONTROL_TRANSFER: from fffff8000350be54 to fffff8000348b600

    STACK_TEXT:
    fffff880`07bcf3f8 fffff800`0350be54 : 00000000`00000050 fffffa80`0e8db000 00000000`00000000 fffff880`07bcf560 : nt!KeBugCheckEx
    fffff880`07bcf400 fffff800`034896ee : 00000000`00000000 00000000`00000372 fffff800`03498200 fffff800`03498318 : nt! ?? ::FNODOBFM::`string'+0x42877
    fffff880`07bcf560 fffff880`083e89f5 : fffff880`083e75bb fffffa80`07ab1000 fffff6fc`400609c0 fffffa80`0e8d5060 : nt!KiPageFault+0x16e
    fffff880`07bcf6f8 fffff880`083e75bb : fffffa80`07ab1000 fffff6fc`400609c0 fffffa80`0e8d5060 fffffa80`07ab1018 : usbaudio!memmove+0xc5
    fffff880`07bcf700 fffff880`0501b277 : fffffa80`07ab1110 00000000`00000000 fffffa80`00000372 fffffa80`0e8d5060 : usbaudio!USBCaptureProcessPin+0x16f
    fffff880`07bcf790 fffff880`0501b764 : fffffa80`07ab1018 00000000`00000000 fffffa80`07512f00 fffffa80`0928ed00 : ks!CKsPin::processingObjectWork+0xe3
    fffff880`07bcf7e0 fffff880`05019e27 : fffffa80`0928ecc0 fffffa80`07512f00 fffffa80`097fdad0 fffffa80`0928ecc0 : ks!CKsPin::process+0x70
    fffff880`07bcf810 fffff880`0501abb1 : fffffa80`0928ecc0 fffffa80`07512f88 fffffa80`07512c60 fffffa80`097fdad0 : ks!CKsQueue::AddFrame+0x1e7
    fffff880`07bcf850 fffff880`0503304b : 00000000`00000000 00000000`00000000 fffff880`07bcf950 fffffa80`0be35d18 : ks!CKsQueue::TransferKsIrp+0x4a1
    fffff880`07bcf8e0 fffff880`0503201b : fffffa80`09d4a010 fffff880`051bd5fb fffffa80`072f4158 fffffa80`07512fb8 : ks!CKsPin::DispatchDeviceIoControl+0x20b
    fffff880`07bcf940 fffff880`05019620 : fffff880`07bcfa20 fffff880`051bda0f fffffa80`07512c60 fffffa80`072f4150 : ks!KsDispatchIrp+0xdb
    fffff880`07bcf970 fffff880`051bd825 : fffffa80`07512f70 fffffa80`072f4150 fffffa80`072f4150 fffffa80`07512c60 : ks!CKsDevice::passThroughIrp+0xc0
    fffff880`07bcf9b0 fffff800`037a76b7 : fffffa80`09dfaf20 fffff880`07bcfca0 fffffa80`00000000 fffffa80`09dfaf20 : ksthunk!CKernelFilterDevice::DispatchIrp+0x11d
    fffff880`07bcfa10 fffff800`037a7f16 : fffff880`02fd5180 00000000`00000244 00000000`00000000 00000000`01730970 : nt!IopXxxControlFile+0x607
    fffff880`07bcfb40 fffff800`0348a853 : 00000000`00000000 fffff880`07bcfca0 00000000`00000000 fffff800`037ab063 : nt!NtDeviceIoControlFile+0x56
    fffff880`07bcfbb0 00000000`7787fdca : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
    00000000`01def628 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7787fdca


    STACK_COMMAND: kb

    FOLLOWUP_IP:
    usbaudio!memmove+c5
    fffff880`083e89f5 488b440af0 mov rax,qword ptr [rdx+rcx-10h]

    SYMBOL_STACK_INDEX: 3

    SYMBOL_NAME: usbaudio!memmove+c5

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: usbaudio

    IMAGE_NAME: usbaudio.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bcc07

    FAILURE_BUCKET_ID: X64_0x50_usbaudio!memmove+c5

    BUCKET_ID: X64_0x50_usbaudio!memmove+c5

    Followup: MachineOwner
    ---------

    3: kd> !analyze -v
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: fffffa800e8db000, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff880083e89f5, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 0000000000000000, (reserved)

    Debugging Details:
    ------------------


    Could not read faulting driver name

    READ_ADDRESS: fffffa800e8db000

    FAULTING_IP:
    usbaudio!memmove+c5
    fffff880`083e89f5 488b440af0 mov rax,qword ptr [rdx+rcx-10h]

    MM_INTERNAL_CODE: 0

    CUSTOMER_CRASH_COUNT: 1

    DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

    BUGCHECK_STR: 0x50

    PROCESS_NAME: audiodg.exe

    CURRENT_IRQL: 0

    TRAP_FRAME: fffff88007bcf560 -- (.trap 0xfffff88007bcf560)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=0000000000000000 rcx=fffff8800c138fd0
    rdx=00000200027a203a rsi=0000000000000000 rdi=0000000000000000
    rip=fffff880083e89f5 rsp=fffff88007bcf6f8 rbp=fffffa800e8d5258
    r8=0000000000000372 r9=0000000000000004 r10=0000000000000000
    r11=fffff8800c138cd0 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei ng nz na pe nc
    usbaudio!memmove+0xc5:
    fffff880`083e89f5 488b440af0 mov rax,qword ptr [rdx+rcx-10h] ds:0001:fffffa80`0e8daffa=????????????????
    Resetting default scope

    LAST_CONTROL_TRANSFER: from fffff8000350be54 to fffff8000348b600

    STACK_TEXT:
    fffff880`07bcf3f8 fffff800`0350be54 : 00000000`00000050 fffffa80`0e8db000 00000000`00000000 fffff880`07bcf560 : nt!KeBugCheckEx
    fffff880`07bcf400 fffff800`034896ee : 00000000`00000000 00000000`00000372 fffff800`03498200 fffff800`03498318 : nt! ?? ::FNODOBFM::`string'+0x42877
    fffff880`07bcf560 fffff880`083e89f5 : fffff880`083e75bb fffffa80`07ab1000 fffff6fc`400609c0 fffffa80`0e8d5060 : nt!KiPageFault+0x16e
    fffff880`07bcf6f8 fffff880`083e75bb : fffffa80`07ab1000 fffff6fc`400609c0 fffffa80`0e8d5060 fffffa80`07ab1018 : usbaudio!memmove+0xc5
    fffff880`07bcf700 fffff880`0501b277 : fffffa80`07ab1110 00000000`00000000 fffffa80`00000372 fffffa80`0e8d5060 : usbaudio!USBCaptureProcessPin+0x16f
    fffff880`07bcf790 fffff880`0501b764 : fffffa80`07ab1018 00000000`00000000 fffffa80`07512f00 fffffa80`0928ed00 : ks!CKsPin::processingObjectWork+0xe3
    fffff880`07bcf7e0 fffff880`05019e27 : fffffa80`0928ecc0 fffffa80`07512f00 fffffa80`097fdad0 fffffa80`0928ecc0 : ks!CKsPin::process+0x70
    fffff880`07bcf810 fffff880`0501abb1 : fffffa80`0928ecc0 fffffa80`07512f88 fffffa80`07512c60 fffffa80`097fdad0 : ks!CKsQueue::AddFrame+0x1e7
    fffff880`07bcf850 fffff880`0503304b : 00000000`00000000 00000000`00000000 fffff880`07bcf950 fffffa80`0be35d18 : ks!CKsQueue::TransferKsIrp+0x4a1
    fffff880`07bcf8e0 fffff880`0503201b : fffffa80`09d4a010 fffff880`051bd5fb fffffa80`072f4158 fffffa80`07512fb8 : ks!CKsPin::DispatchDeviceIoControl+0x20b
    fffff880`07bcf940 fffff880`05019620 : fffff880`07bcfa20 fffff880`051bda0f fffffa80`07512c60 fffffa80`072f4150 : ks!KsDispatchIrp+0xdb
    fffff880`07bcf970 fffff880`051bd825 : fffffa80`07512f70 fffffa80`072f4150 fffffa80`072f4150 fffffa80`07512c60 : ks!CKsDevice::passThroughIrp+0xc0
    fffff880`07bcf9b0 fffff800`037a76b7 : fffffa80`09dfaf20 fffff880`07bcfca0 fffffa80`00000000 fffffa80`09dfaf20 : ksthunk!CKernelFilterDevice::DispatchIrp+0x11d
    fffff880`07bcfa10 fffff800`037a7f16 : fffff880`02fd5180 00000000`00000244 00000000`00000000 00000000`01730970 : nt!IopXxxControlFile+0x607
    fffff880`07bcfb40 fffff800`0348a853 : 00000000`00000000 fffff880`07bcfca0 00000000`00000000 fffff800`037ab063 : nt!NtDeviceIoControlFile+0x56
    fffff880`07bcfbb0 00000000`7787fdca : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
    00000000`01def628 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x7787fdca


    STACK_COMMAND: kb

    FOLLOWUP_IP:
    usbaudio!memmove+c5
    fffff880`083e89f5 488b440af0 mov rax,qword ptr [rdx+rcx-10h]

    SYMBOL_STACK_INDEX: 3

    SYMBOL_NAME: usbaudio!memmove+c5

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: usbaudio

    IMAGE_NAME: usbaudio.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bcc07

    FAILURE_BUCKET_ID: X64_0x50_usbaudio!memmove+c5

    BUCKET_ID: X64_0x50_usbaudio!memmove+c5

    Followup: MachineOwner
     
  6. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
    To post the actual crash dumps, please go to C:\Windows\Minidump

    Copy and paste the files in there to any other folder. Then zip them. Attach to a post using the paperclip above where you type, in advanced mode reply.

    I don't think it matters which bridge you remove. In the meantime also, install the latest audio driver available for your USB device. If you need a link, I'll provide it after looking at the dump(s).
     
  7. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0

    You're the man btw, I really can't say thanks enough. If you could provide the usb audio drivers link that would be fantastic as I don't exactly know what I'm looking for.
     

    Attached Files:

  8. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
    Alright. Here's what to do to get the machine under control.

    1) Uninstall all Gigabyte apps which only cause problems for the masses. This means Easytune 6 and other utilities. Be glad they're removed, after. :)

    2) This driver is too old:

    Code:
    pcouffin pcouffin.sys Tue Dec 05 09:39:30 2006  
    It is commonly installed with CloneDVD or similar software. What you want to do is uninstall this or related softwares to get rid of this driver. Make sure it is gone from C:\Windows\System32\drivers
    - after removal.

    I recommend PowerISO for drive emulation since it has perfect stability under Windows 7. The drive emulation feature remains free forever although other features require to pay, such as burning.

    PowerISO - Create, Edit, Compress, Encrypt, Split, Mount, Extract ISO file, ISO/BIN converter, Virtual Drive

    3) Install the newest version of GPU-Z to overwrite this driver with the newest one:

    Code:
    GPU_Z    GPU-Z.sys    Mon Aug 06 10:47:00 2007
    Better to uninstall GPU-Z first. Then get the latest here:

    http://www.softpedia.com/progDownload/GPU-Z-Download-85523.html


    4) Definitely install the newest video card driver:
    Code:
    atikmdag atikmdag.sys Mon Aug 17 23:05:47 2009 
    Here's the link:

    Drivers & Support | GAME.AMD.COM

    5) I'll need only a little further info so we can update the audio driver. Please type msinfo32 in the start menu then hit enter. File | save on the screen that opens. Then zip the saved file and attach as before.

    The machine will be really good after these changes and the audio driver updated too, which I'll link you to in my next post.
     
    #8 TorrentG, Jul 23, 2010
    Last edited: Jul 23, 2010
  9. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    Dude this is literally the best support I've ever gotten from someone online, thanks sooo much!!!
     
  10. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    btw what about the bio updater from gigabyte should I keep that?
     
  11. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
    You're welcome.

    It's important to update the USB audio driver. As I said in number 5, if you post the info as shown how to do, I can see which USB audio device you have, in order to get the driver for it updated.

    I'd uninstall the bios updater too. It's only software that updates the bios which is a one time use. In the future, if a newer bios is posted on the site to install, you can deal with that then. I wouldn't bother though if there are no issues. Then again, running the latest bios is always good so that will be your call.

    So ya...follow number 5 and we'll see what we can do.

    Did you do the other things already? If so, any crashes since?
     
  12. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    I uninstalled all the gigabyte apps and when I looked to find that pcouffin.sys file it's related to VSO software which was a torrented version of CovertXtoDVD so I uninstalled ConvertXtoDVD but the driver is still there, how would I go about getting rid of it?

    Also when I go into control panel and try to find GPU-Z to uninstall it, I can't find it :(

    I'm making my way down the list slowly but surely.
     
  13. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
  14. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    MSINFO

    Here it is
     

    Attached Files:

  15. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    I deleted the pcuffin.sys but I can't find the GPU-Z.sys. I actually remember that I never went through any installation prompts for GPU-Z but somehow there is an icon on my desktop. So I deleted the pcuffin.sys and ran the ccleaner and installed the new catalyst suite.
     
  16. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
  17. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    Well I have logitech speaker system and some headphones hooked up to the speakers..

    I have these Newegg.com - Logitech X-540 70 watts 5.1 Speakers

    with headphones hooked into the little black square volume control piece, but that piece didn't have a mic jack so I have a logitech mic hooked up to the motherboard on the back panel.
     
  18. kskwerl

    kskwerl New Member

    Joined:
    Jul 9, 2010
    Messages:
    46
    Likes Received:
    0
    When I click that link for the USB audio driver you posted above it takes about 30 seconds then prompts me for username/pass.
     
  19. TorrentG

    TorrentG Banned

    Joined:
    May 31, 2010
    Messages:
    7,814
    Likes Received:
    372
    Cool. That doesn't require any drivers.

    The USB audio may be for your Motorola stuff.

    I would complete doing everything suggested if not already. If there are any further crashes, then post the new crash dumps for them. Hopefully it won't even be necessary as we could have already fixed the problem(s).

    Good luck and keep us updated in any case.
     

Share This Page

Loading...