Windows 7 Chaning mac address aitlive WT-2000pci

Method 1: Using Device Manager​

1. Press Windows Key + X and select "Device Manager."
2. Locate your wireless network adapter (Ralink RT61) in the device list.
3. Right-click on the wireless adapter and select "Properties."
4. Go to the "Advanced" tab.
5. Look for a property similar to "Network Address," "MAC Address," or "Locally Administered Address."
6. Change the value to the desired MAC address and click "OK."

   Method 2: Using Command Prompt​

7. Press Windows Key + X and select "Command Prompt (Admin)."
8. Type the following command to get the list of network adapters:
   Code:

    netsh interface show interface

9. Identify the wireless adapter from the list.
10. To change the MAC address, use the following command:
    Code:

     netsh interface set interface name="Your_Adapter_Name" newmac=New_MAC_Address

    Replace Your_Adapter_Name with the name of your wireless adapter and New_MAC_Address with the MAC address you want to set.

    Method 3: Using Third-Party Software​

    You can also use third-party software like Technitium MAC Address Changer to easily change the MAC address of your network adapters. Make sure to restart your computer after changing the MAC address for the changes to take effect. If these methods don't work, you may need to check for specific drivers that support MAC address changes on Windows 7 for your Airlive WT-2000pci card. Please try these steps and let me know if you encounter any issues or need further assistance in changing the MAC address on your wireless card.