Windows 10 Getting BSOD what come only after cold boot so far.

northernhermit

Member
Joined
Apr 9, 2017
Messages
44
So i have done all these so far: MemTest86+ without errors, clean installed all drivers, tried to reset but got BSOD during it too, sfc /scannow fails, dism caused BSOD too, did check disk too and as i told in title, it only come when i cold boot PC.
 

Attachments

Sort by date Sort by votes
nmsuk said:
How odd as altering memory timings or volts only invalidates warranty if you go beyond certain values.
Click to expand...
Finland (place where i live) have zero tolerance warranty system pretty much. Only repair place can adjust those in here and if i RMA something i have to include proof (receipt is fine) So my hopes is in that these are caused by software only.... Oh by the way... How bad sign is if pc is stuck on reboot ?
 
Upvote 0 Downvote
In the bios if you goto oc settings while in advanced mode. Select OC Explore mode to expert. Then goto dram frequency and select 2133 for the ram speed. Then goto Advanced DRAM configuration and where it says auto. Change those to the rated timings for the ram. Also as you ram is 1.2v where it says DRAM Voltage enter in 1.200. Save and then boot. Post may take awhile as it'll do ddr4 training after any memory related changes. Also if you're up to it. Check which slot the memory is. Best results are found with ram in Slot A2 second slot from the cpu.
 
Upvote 0 Downvote
Just so you don't panic, memory training may boot and then power off multiple times. Up to 6 if I remember correctly. But on doing those should then boot correctly.

 
Last edited by a moderator:
Upvote 0 Downvote
nmsuk said:
Just so you don't panic, memory training may boot and then power off multiple times. Up to 6 if I remember correctly. But on doing those should then boot correctly.
Click to expand...
Thought so XD you were too slow :3 We will see tomorrow if issues are gone So i will post update at morning
 
Upvote 0 Downvote
nmsuk said:
Good luck. I was lucky with my memory it just worked. But many are in your situation. Just take patience and lots of tinkering with the memory settings.
Click to expand...
Yah... By the way, is AMD cool n' quiet feature still nuisance in games ? x) Last AMD were phenom ii x4 945 what i had XD
 
Upvote 0 Downvote
Okay... No dump files today but when rebooted pc it got stuck to post and bios freezed when went to check up settings after it got stuck. Plus ram speed is still stuck in 1066 mhz... Should i put "Memory try it" option in bios settings and should i use Ryzen master ?
 
Upvote 0 Downvote
Ok if you go to oc settings in the bios, try setting you mem to 1.25V Ryzen and memory is a right pain at the moment.
 
Upvote 0 Downvote
I know exactly what that hmmm is. So I shall give my reasoning. Most ram thats 1.2v on Ryzen seems to need 1.350v~/ Now not wanting to terrify the OP I thought 1.25 is well within the ~10% the voltage can vary so won't harm anything.
 
Upvote 0 Downvote
I have to wait monday to do that because i'm not licensed computer repairer x) I have done pretty much everything what consumer is allowed to do. Didn't expect you to answer that fast XD But good thing is that BSODs are finally gone so i can now chill
 
Upvote 0 Downvote
You must log in or register to reply here.