Windows 10 Getting BSOD what come only after cold boot so far.

northernhermit

Member
Joined
Apr 9, 2017
Messages
44
So i have done all these so far: MemTest86+ without errors, clean installed all drivers, tried to reset but got BSOD during it too, sfc /scannow fails, dism caused BSOD too, did check disk too and as i told in title, it only come when i cold boot PC.
 

Attachments

Sort by date Sort by votes
Theres many a discussion about memory and whats best at the moment. I think you'd find 2z8gb easier ot get running than a single 16gb stick. You could explain all this to the tech on Monday. I'd also mention AMD are recommending single rank memory in a dual channel config.
 
Upvote 0 Downvote
Windows Install was clean and here is list what i have:
PSU: EVGA Supernova G2 550w modular
Mobo: MSI B350 Tomahawk
CPU: Ryzen 7 1700 @stock clocks
RAM: Corsair Valueselect 1x 16gb s/n CMV16GX4M1A2133C15
GPU: EVGA Gtx 1080 Superclocked 8GB
SSD(OS is in this): Crucial MX200 256 gb
HDD: 1 tb WD Caviar Blue
Sound card: Focusrite Scarlett 2i2 Gen 1 USB
Mic: Samson Go Mic USB
KB: Tesoro Durandal G1S (On USB Hub)
Mice: Roccat Tyon (on USB Hub)
Gamepad: PS4 Controller
Monitors: BenQ XL2411Z (Main) and 2x Samsung S23C450
USB Stick: Kingston Data Traveler 16gb (on USB Hub) at FAT32 and this is only working USB stick i have and it have clean
windows 10 install media.
Have Hotas too but haven't installed drivers and not even plugged on after getting mobo, cpu and ram.
As security i have MBAM 3.0.6 to clean malware and Windows Defender to make sure.
Oh forgot tell that ever since i got those mobo, cpu and ram and started to do clean install windows USB 2.0 ports went off during install so i had to install windows while USB stick were in USB 3.0 port.
 
Last edited:
Upvote 0 Downvote
chkdsk didn't found errors... Can't do MemTest today because i don't wanna leave this unguarded to do that have to leave in about 3 hours. Tomorrow same thing but i have to leave right after morning coffees x)
 
Upvote 0 Downvote
kemical said:
Oh ok.. See how you go with the default settings. Thanks to @nmsuk as I'd kept meaning to ask that 'Q' but kept forgetting through due to the haze of life..
Click to expand...
I will turn off pc when i go afk that way i don't need to wait till morning to get results :3 It is so weird why BSOD only happens in cold boot, never have happened in games or prime95 run (had this one after second BSOD for like 12 hours)
 
Upvote 0 Downvote
Yes I would. Look on the QVL list for the boards at MSI. Then get a matched set. Then put them in slots A2 and B2. Memory Link Removed
 
Upvote 0 Downvote
You must log in or register to reply here.