GPU-Z update

kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z has reached Version 2.7.0.
v2.7.0 (January 23rd, 2018)
  • GPU-Z will no longer block Windows shutdown/restart on Fall Creators Update
  • Updated NVFlash for newer NVIDIA cards like GTX 1070 Ti
  • Fixed reported VRAM size on Vega (now 8192 MB)
  • Fixed incorrect labelling of GPU Memory Clock Sensor on NVIDIA
  • Fixed Polaris 21 OpenCL and TMU/ROP detection
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z has reached Version 2.8.0 .
v2.8.0 (February 23rd, 2018)
  • Fixed crashes and other issues on AMD Ryzen Raven Ridge APU
  • Added DXVA 2.0 hardware decoder info to Advanced Tab
  • "Disable sensor" menu item now properly called "Hide"
  • Improved VRAM usage monitoring on AMD
  • Improved rendering performance of NVIDIA PerfCap sensor
  • Improved AMD power limit reporting in Advanced Panel
  • "MemVendor" is now included in XML dump output
  • Fixed NVIDIA PerfCap sensor drawing outside its area
  • Fixed "BIOS reading not supported" error on NVIDIA, on some motherboards
  • Fixed HBM memory type detection in Advanced Tab on Fury X
  • Fixed temperature misreadings on Vega
  • Fixed "Digital Signature" label getting truncated on some hidpi screens
  • Added support for RX 460 Mobile, RX 560 Mobile, RX 570 Mobile, RX 580 Mobile, RX 550 based on Baffin LE
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z has reached Version 2.9.0
v2.9.0 (May 7th, 2018)
  • Fixed empty or incorrect readings for NVIDIA GPUs in TCC mode (Quadro/Tesla)
  • Added WDDM 2.4 support for Windows 10 RS4 / April Update / Spring Creators Update
  • Added support for NVIDIA Tesla V100
  • Added support for Haswell GT1 in Celeron 2961Y
  • Added support for HBM2 memory type in Advanced Panel, NVIDIA BIOS
  • Added support for perf cap reason 'none' (Tesla in TCC mode)
  • Addded more Bristol Ridge models
  • Fixed detection for AMD Carrizo/Bristol/Stoney
  • Changed Wani name to Carrizo/Bristol
  • Fixed DirectX support reporting for ATI RV200
  • Vega's SOC Clock and Hot Spot sensors are now disabled by default at request of AMD. You can enable them any time in settings
  • When GPU-Z is set to launch on Window startup, disable "This file was downloaded from Internet" message
  • Fixed top right button corruption when resizing the window
  • Improved drawing code for sensor graph
 


Last edited:

kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z has reached Version 2.10.0. This version adds CPU temperature monitoring for Ryzen, Sandy Bridge and newer CPUs:
Version History
v2.10.0 (July 19th, 2018)
  • Added CPU temperature monitoring for Intel Sandy Bridge and newer and all AMD Ryzen
  • Optimized sensor graph drawing code for faster repaint with lower CPU usage
  • Various improvements to avoid error messages related to Query External
  • Added button to reset sensor data
  • Fixed missing tooltip for GPU clock sensor
  • Report Overdrive Limits in Advanced: ATI/AMD BIOS
  • Added GDDR6 memory type
  • Delay "Screenshot taken" dialog by a second, to not get captured by screenshot
  • Fixed secondary devices showing up with no info (old ATI cards)
  • Fixed memory clocks on Intel Arrandale
  • Fixed memory module info in Advanced Panel for AMD Vega
  • Added support for AMD Vega M GH, Vega M GL, WX 4130, WX 4150, WX 8100, Radeon Pro Vega 56, Pro SSG
  • Added support for AMD Vega Graphics in Ryzen 3 2200U, Ryzen 3 2300U, Ryzen 3 Pro 2200GE, Ryzen 5 2400GE, Ryzen 7 2400U
  • Added support for Intel UHD 605, UHD 610, UHD 630, P580
  • Added support for NVIDIA GeForce GTX 1060 6 GB, GTX 1050 3 GB, GTX 1050 2 GB (GP106), GTX 1050 Ti Max-Q, MX110, MX130, GTX 750 Ti (GM107B)
  • Added support for NVIDIA Quadro GV100, P600 Mobile, P620, P2000, P3200, P4200, Grid M3-3020
  • Added support for NVIDIA Tesla V100, V100-PCIE-32GB, M4, P106-090, P5200, P6, P40, P100 SXM2, P100 PCIe 12 GB
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z has reached v2.11.0 adding RTX Ruring support.

Version History
v2.11.0 (September 17th, 2018)
  • Added NVIDIA GeForce RTX Turing support
  • Added option to minimize GPU-Z on close
  • Added system RAM memory usage sensor
  • Added temperature monitoring offset for Threadripper 2nd gen
  • Fixed typo in NVIDIA Perf Cap Reason tooltip
  • GPU-Z will no longer use AMD ADL memory sensors because they are buggy, WDDM monitoring used again
  • GPU Lookup feature improved by taking boost clock into account
  • Added ability to clean up old QueryExternal files in temp directory
  • Added support to BIOS parser for USB-C output, GDDR6 memory, 16 Gbit memory chips
  • Added support for NVIDIA RTX 2080 Ti, RTX 2080, RTX 2070, GTX 750 Ti (GM107-A), GTX 1050 Ti Mobile 4 GB, Quadro P1000, Tesla P100 DGXS, GeForce 9200
  • Added support for AMD Vega 20, Fenghuang, Ryzen 5 Pro 2500U, 5 Pro 2400G, 3 Pro 2200G, 3 Pro 2300U, 3 2200GE, Athlon 200GE, Embedded V1807B
  • Added support for Intel UHD 610, UHD P630 (Xeon), Coffee Lake GT3e (i5-8259U)
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z, a free graphics card information utility, has reached Version 2.12.0.
Version History
v.2.12.0 (October 12th, 2018)
  • Added detection for fake graphics cards using old relabeled NVIDIA GPUs (G84, G86, G92, G94, G96, GT215, GT216, GT218, GF108, GF106, GF114, GF116, GF119, GK106)
  • Added BIOS saving capability for NVIDIA Turing
  • Added monitoring for multiple fans on Turing
  • Added fan speed % monitoring on Turing
  • Added HDMI and DisplayPort info to Advanced -> NVIDIA
  • Power draw on NVIDIA cards is now reported in both TDP % and Watt
  • Fixed system hang caused by Valve anti-cheat
  • Fixed memory bandwidth on Turing with GDDR6
  • Fixed tooltip for system memory usage sensor
  • Fixed broken Radeon RX 400 GPU usage monitoring on newer drivers
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z has reached Version 2.13.0.
Version History
v2.13.0 (October 15th, 2018)
  • Fixed missing fan speed sensors for pre-Turing cards using GeForce driver 400 and newer
  • Fixed some rare crashes during GPU-Z startup
  • Minimize on close will now trigger on "Close" button click, Escape key, ALT+F4. Use the tray icon menu to exit GPU-Z when "minimize on close" is enabled.
  • Screenshot button tooltip will no longer be visible in screenshots
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z, a free graphics card information utility, has reached Version 2.14.0.
v2.14.0 (October 25th, 2018)
  • When available, boost clock is used to calculate fillrate and texture rate
  • Fixed missing Intel GPU temperature sensor
  • Fixed wrong clocks on some Intel IGP systems ("12750 MHz")
  • NVIDIA power sensors now labeled with "W" and "%"
  • Added support for Intel Coffee Lake Refresh
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z, a free graphics card information utility, has reached Version 2.15.0.
v2.15.0 (November 16th, 2018)
  • Added hardware giveaway (to the left of "close" button): 2x PowerColor Radeon RX 590 Red Devil, 2x AMD Ryzen 2600X, 15x $30 Steam coupon
  • Fixed Quadro K4000 and K2100M detected as fake
  • Added support for AMD Radeon RX 590
  • Added support for Intel Whiskey Lake, UHD Graphics 617 (Macbook Air 2018)
  • Added support for NVIDIA Tesla V100-SXM2-32GB
  • Fixed Vega 20 release date
 


kemical

Windows Forum Admin
Staff member
Premium Supporter
GPU-Z, a free graphics card information utility, has reached Version 2.16.0
by btarunr Today, 15:34 Discuss (0 Comments)
TechPowerUp today released the latest version of GPU-Z, the popular video sub-system information and diagnostic utility. Version 2.16.0 adds support for new and upcoming GPUs, new features and comes with various bug fixes. To begin with, GPU-Z adds support for NVIDIA's GeForce RTX 2060 graphics card. Support is added for the EVGA iCX sensor suite on RTX 2080 FTW3 and RTX 2080 Ti FTW3 graphics cards.

GPU-Z can now detect UWD and DCH graphics drivers. When such drivers are detected on Windows 10 machines, the driver version will include the "DCH" marker. The "Advanced" tab gives info on the DCH driver status of the installed GPU, too. With version 2.16.0, we also made GPU-Z more high-DPI friendly. The splash screen is aware high-DPI screen resolutions. More importantly, we fixed the sensor list not correctly displaying on high-DPI monitors. Rendering artifacts when resizing the sensor window have been fixed. The main settings panel now has a checkbox that lets you control the updater (this option was previously located inside the update checker itself). A rare crash noticed with AMD "Polaris" GPUs has been fixed.

The change-log follows.

  • When a UWD/DCH driver is detected on Windows 10, it will be displayed as "DCH" in driver version
  • Advanced tab now includes an entry showing DCH driver status on Windows 10
  • Added EVGA iCX support for RTX 2080 FTW3 and RTX 2080 Ti FTW3
  • Fixed GPU-Z crash on AMD Polaris
  • Added support for NVIDIA GeForce RTX 2060
  • Splash screen is now DPI aware
  • Fixed sensor list not fully visible on some DPI settings
  • Fixed rendering artifacts when resizing sensor window
  • Moved "check for updates" setting to main settings panel
 


This website is not affiliated, owned, or endorsed by Microsoft Corporation. It is a member of the Microsoft Partner Program.
Top