The dirty details if needed.
Below is the Network setup currently- Plan on getting a 24- 48 port giabit switch to keep the number of cascaded switches to a minimum.
******************************************
NOTE that during the testing phase I believe I had ONLY the OFFICE PC and the devices in this section connected:
ISP provided Modem Motorola NVG-510, disabled DHCP, Static IP address (The below D-LINK_-_DI-524 set to static, and manages DHCP for attached devices.
D-LINK_-_DI-524>D-Link GO-SW-8GE 101001000Mbps 8-Port Gigabit Metal Desktop Switch>
HP 4000N Network printer
(2) NAS's (Iomega 35541 EZ Media & Backup Center 2TB NAS Network Hard Drive)
Obitech 110 VOIP- service thru Google Voice
(1) Office PC Win7 x64 PRO
*******************************************
Currently in addition to the above:
(1) port of the D-Link GO-SW-8GE 101001000Mbps 8-Port Gigabit feeds a switch in the front of the house were the Win7 x32 PRO Media Center PC is located, that PC being directly attached to the switch- an (1) port of this switch feeding a 10/100 switch in which 10/100 devices (3 SiliconDust HDHomerun ASTC OTA tuners) are attached.