- Thread Author
-
- #1
Hi,
This is
As you see,
I want to delete a subnet (like /32 or bigger) from this but I get error:
Error:
Windows 10, PowerShell version is 5.1 (18200).
This is
route print output:
Code:
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.50 55
0.0.0.0 128.0.0.0 192.168.10.252 192.168.10.96 257
128.0.0.0 128.0.0.0 192.168.10.252 192.168.10.96 257
1.1.1.1 255.255.255.0 192.168.1.1 192.168.1.50 56
185.1.1.1.1 255.255.255.255 192.168.1.1 192.168.1.50 311
192.168.10.0 255.255.255.0 On-link 192.168.10.96 257
192.168.10.96 255.255.255.255 On-link 192.168.10.96 257
192.168.10.255 255.255.255.255 On-link 192.168.10.96 257
===========================================================================
Persistent Routes:
Network Address Netmask Gateway Address Metric
1.1.1.1 255.255.255.0 192.168.1.1 1
===========================================================================1.1.1.1/24 is added in routing table.I want to delete a subnet (like /32 or bigger) from this but I get error:
Code:
route delete -p 1.1.1.10/32 192.168.1.1
route delete -p 1.1.1.0/25 192.168.1.1I know I can remove the whole /24 subnet and then use a Python script to generate the desired subnets, but my question is whether it's possible to remove a smaller subnet in routing table.
Windows 10, PowerShell version is 5.1 (18200).