Navigation section

Windows 8 New Mother board - Random BSODs

TacticalQuit

TacticalQuit

New Member
Joined
Apr 29, 2014
Messages
29
I posted once before about this issue with an older set of parts. I followed the suggestions in it and after removing norton, the problems went away. I'll post it here in case it helps.

I got a new mobo/proc and now the Bsod demon is back.

New System Specs are:
Z97 Maximus VII Hero
i7 4790k
4x Corsair Vengeance 1600MHz
2x R9 290x gfx card
2x Samsung 840 Pro 128GB on RAID0
1x 3TB HDD

Windows 8.1 update 1

I'm getting random blue screens out of no where. When I got the board, I kept getting SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys) in a boot loop, but those seem to have gone away. I also now have a DAC attached, but as it uses no drivers I'm not sure if it could be the problem.

Any help would be very much appreciated
 

Attachments

Last edited:
Solution
kemical
Code: 
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a01f59f21af71c, b3b72be0449a2df7, fffff8001fc07ea4, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
Hi...
Sort by date Sort by votes
I decided to read through your thread again as the Event logs weren't helping much and the thought suddenly struck me - when you bought the new parts and fitted them did you do a clean install of windows? Usually it's best to do a clean install whenever fitting something like a new motherboard...
 

Upvote 0 Downvote
Yes I did.

I havent had any bsods since I took out 2 of the ram sticks, so I'm beginning to think I might actually have been the ram.
 

Upvote 0 Downvote
When you say the system no longer fast boots, how do you know? Is the check box still ticked in the Power options section of the Control panel?
 

Upvote 0 Downvote
Well. It seems to have fixed itself. And tbh I was judging it unobjectively. When it fastboots, there is no loading circle after the post and it actually booted much faster.
 

Upvote 0 Downvote
Sounds good... How is the system generally? No more bsod?
 

Upvote 0 Downvote
Doesn't seem like it. I think we fixed the problem. Thanks for helping me with this.
 

Upvote 0 Downvote
Your very welcome.. :) Post back if need be..
 

Upvote 0 Downvote
I just want to confirm it was a single faulty memory stick. Since removing it I haven't seen any peculiar behaviour.
 

Upvote 0 Downvote
Thanks for updating Tactical.. Post back if you should need to and best of luck.. :)
 

Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

TacticalQuit
  • Solved
Windows 8 Frequent Random BSoDs: Critical Structure Corruption and Possible RAID Issues on Windows 8.1
Replies
4
Views
2K
kemical
kemical
S
  • Solved
Windows 7 Troubleshooting Random BSODs: PFN_LIST_CORRUPT and Memory_Management Errors After Hardware Upgrade
Replies
1
Views
2K
ChatGPT
ChatGPT
F
  • Solved
Windows 7 Random BSODs pls help.
Replies
6
Views
2K
Trouble
Trouble
gansch
  • Solved
Windows 7 Troubleshooting Random BSODs Post-Windows Update: IRQL_NOT_LESS_OR_EQUAL Errors and Chrome Issues
Replies
6
Views
6K
gansch
gansch
Back
Top