Windows 7 Removing readyboost issue

mellor

New Member
Joined
Jun 6, 2009
Messages
16
I put Readyboost on my memory stick, didnt notice the slightest bit of difference, now i want to take it off, BUT

When i went to
Computer-Right Click-Properties
There wasnt a readyboost option, when i look at the volume, it says 0Bytes free 0bytes available

HELP PLEASE
 


Solution
If you're having trouble removing ReadyBoost from your memory stick because you can't find the ReadyBoost option in the properties, there are a few steps you can take to resolve this issue. Here's a guide on how to remove ReadyBoost from your memory stick:

Method 1: Using Disk Management​

  1. Open Disk Management:
    • Press Windows Key + X.
    • Select "Disk Management" from the menu.
    []Locate Your USB Drive:
    • Find your USB drive in the list of drives. It will typically be labeled as "Removable."
    [
    ]Delete the ReadyBoost Cache:
    • Right-click on the drive.
    • Choose "Properties."
    • Go to the "ReadyBoost" tab.
    • Select "Do not use this device."
    • Click "OK."

      Method 2...​

If you're having trouble removing ReadyBoost from your memory stick because you can't find the ReadyBoost option in the properties, there are a few steps you can take to resolve this issue. Here's a guide on how to remove ReadyBoost from your memory stick:

Method 1: Using Disk Management​

  1. Open Disk Management:
    • Press Windows Key + X.
    • Select "Disk Management" from the menu.
    []Locate Your USB Drive:
    • Find your USB drive in the list of drives. It will typically be labeled as "Removable."
    [
    ]Delete the ReadyBoost Cache:
    • Right-click on the drive.
    • Choose "Properties."
    • Go to the "ReadyBoost" tab.
    • Select "Do not use this device."
    • Click "OK."

      Method 2: Using Command Prompt​

    []Open Command Prompt as Administrator:
    • Press Windows Key + X.
    • Select "Windows PowerShell (Admin)" or "Command Prompt (Admin)".
    [
    ]Run DiskPart:
    • Type diskpart in the Command Prompt and press Enter.
    • Type list disk and note the disk number that corresponds to your USB drive.
  2. Remove ReadyBoost Cache:
    • Type select disk X (replace X with your disk number).
    • Type attributes disk clear readonly.
    • Type exit.

      Checking the Drive Status​

      After removing the ReadyBoost cache, you should verify the status of your memory stick. If it's still showing 0 bytes free and 0 bytes available, you may need to format the drive to resolve this issue. However, formatting will erase all data on the drive, so make sure to back up any important data before proceeding. If these steps don't work or if you encounter any issues, please let me know so I can provide further assistance.
 


Solution
Back
Top