Windows 7 SMCWPCI-G2 Wi-Fi Driver Issues on Windows 7: Unable to Connect to Internet

Twink

New Member
Joined
Oct 3, 2009
Messages
2
Smcwpci-g2 connect problem

Hello
I have a problem. I have sucefully installed Win 7 x64 but i can not connect to internet. Ihave wi-fi card SMCWPCI-G2 and because now is not Win 7 driver I try install Vista drivers but when I finish Vista driver instalation it shows this error: Link Removed due to 404 Error so i tried connect an ethernet cabel to the pc but it shows it some error so what I must to do for internet conection?

my PC
Computer: Gigabyte Technology Co., Ltd. EP35-DS3L
CPU: Intel Core 2 Quad Q9300 (Yorkfield, M1)
2500 MHz (7.50x333.3) @ 2499 MHz (7.50x333.3)
Motherboard: Giga-Byte GA-EP35-DS3L
Chipset: Intel P35 (Bearlake-P) + ICH9
Memory: 4096 MBytes @ 333 MHz, 5.0-5-5-15
- 2048 MB PC5300 DDR2-SDRAM - Kingston 2G-UDIMM
- 2048 MB PC5300 DDR2-SDRAM - Kingston 2G-UDIMM
Graphics: ATI RADEON HD 4870 512MB GDDR5
ATI RADEON HD 4870 (RV770 XT), 512 MB DDR SDRAM
Drive: WDC WD7500AACS-00D6B0, 732.6 GB, Serial ATA 3Gb/s
Drive: ASUS DRW-20B1LT, DVD+R DL
Drive: HMTCDQ 70PEJGLI, BD-ROM
Drive: HMTCDQ 70PEJGLI, BD-ROM
Drive: HMTCDQ 70PEJGLI, BD-ROM
Drive: HMTCDQ 70PEJGLI, BD-ROM
Sound: Intel 82801IB ICH9 - High Definition Audio [A2]
Sound: ATI RV770 - High Definition Audio Controller
Network: 802.11g Wireless PCI Adapter
Network: Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)

Sorry for bad English
 


Last edited:
Solution
It seems like you're facing connectivity issues with your SMCWPCI-G2 Wi-Fi card on Windows 7 x64. Here are a few steps you can take to troubleshoot and try to establish an internet connection:

Steps to Resolve Internet Connection Issue:​

  1. Driver Installation:
    • Windows 7 Drivers: If possible, try to find specific Windows 7 64-bit drivers for your SMCWPCI-G2 Wi-Fi card. Using Vista drivers might cause compatibility issues.
    • Driver Compatibility Mode: If Windows 7 drivers are not available, you can try installing the Vista drivers in compatibility mode. Right-click on the driver setup file, go to Properties, and under the Compatibility tab, select the option to run in compatibility mode for Windows...
It seems like you're facing connectivity issues with your SMCWPCI-G2 Wi-Fi card on Windows 7 x64. Here are a few steps you can take to troubleshoot and try to establish an internet connection:

Steps to Resolve Internet Connection Issue:​

  1. Driver Installation:
    • Windows 7 Drivers: If possible, try to find specific Windows 7 64-bit drivers for your SMCWPCI-G2 Wi-Fi card. Using Vista drivers might cause compatibility issues.
    • Driver Compatibility Mode: If Windows 7 drivers are not available, you can try installing the Vista drivers in compatibility mode. Right-click on the driver setup file, go to Properties, and under the Compatibility tab, select the option to run in compatibility mode for Windows Vista. Then proceed with the installation.
    []Ethernet Connection:
    • Realtek RTL8168/8111 NIC: Since you're also facing issues with the Ethernet connection, make sure the drivers for the Realtek RTL8168/8111 Gigabit Ethernet NIC are properly installed. You might need to download and install the latest drivers directly from the Realtek website.
    [
    ]Windows Update:
    • After ensuring that drivers are correctly installed, run Windows Update to check for any additional driver updates that may be available for your network devices.
    []Network Troubleshooter:
    • Use the built-in Windows Network Troubleshooter to diagnose and fix common network connection issues. You can access this tool by right-clicking on the network icon in the system tray and selecting Troubleshoot problems.
    [
    ]Device Manager:
    • Check Device Manager to ensure that your Wi-Fi card and Ethernet adapter are both recognized without any errors. Look for any exclamation marks or warning signs next to the network adapters.
    []Restart Networking Services:
    • Sometimes restarting network services can help. Open Command Prompt as an administrator and run the following commands:
      Code:
       netsh winsock reset netsh int ip reset ipconfig /release ipconfig /renew
    [
    ]Network Configuration:
    • Check your network settings to ensure that there are no conflicting configurations. You can reset TCP/IP stack and reset the Winsock catalog by running commands in Command Prompt:
      Code:
       netsh int ip reset reset.log netsh winsock reset catalog
  2. Reboot:
    • After making these changes, restart your computer to apply the settings.

      Additional Notes:​

      • Ensure that your firewall or antivirus software is not blocking your network connections.
      • Verify that the Wi-Fi card is enabled in the BIOS settings of your computer.
      By following these steps, you should be able to diagnose and hopefully resolve the internet connection issues on your Windows 7 system.
 


Solution
Back
Top