Windows 10 whea uncorrectable error

NettleWarbler · May 9, 2018

Mornin all , I don't know if this is the right forum I want , but most times I try to burn a dvd I get a blue screen with whea uncorrectable error and my computer re-starts . Its been the same with when I try to burn blu-rays for a while now , the dvd's were burning ok . Now I seem to be getting it whatever I try to burn .. The software I use for Blu-rays is Nero Platinum 2018 , and the dvds is wondershare dvd creator . I have codecs loaded , but apart from that I don't know what else to use . Thank you .

kemical · May 24, 2018

I went over your dump files again checking the cpu and it may have an issue with the internal timer (look under section 2):

Code:

===============================================================================
Common Platform Error Record @ ffff998a03af0028
-------------------------------------------------------------------------------
Record Id     : 01d3e85f5eefe393
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 5/10/2018 15:42:42 (UTC)
Flags         : 0x00000000

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------...

NettleWarbler · Jul 5, 2018

The external writer I used was a pioneer Blu-ray burner BDR-XD05B , I'v just tried to burn a dual layer Dvd with it and again after about a minute I get a BSOD with whea uncorrectable error .

nmsuk · Jul 5, 2018

I know this is probably silly, but have you tried different sata cables and different sata ports?

kemical · Jul 5, 2018

NettleWarbler said:
The external writer I used was a pioneer Blu-ray burner BDR-XD05B , I'v just tried to burn a dual layer Dvd with it and again after about a minute I get a BSOD with whea uncorrectable error .

Use the following link as well as screenshot regarding firmware:

BDR-XD05B - 6x Slim Portable USB 3.0 BD/DVD/CD Burner. Supports BDXL™ format. Ultra lightweight. USB Bus Powered. CyberLink® software included.

kemical · Jul 5, 2018

Also where are you actually plugging in the device, front or back panel, as it can make a difference.

I also read something about when using USB 2.0 both cables must be used whereas 3.0 you only need to use the one:

1. - Are both USB connectors needed for operation?

Click to expand...

Answer: When using a USB 3.0 port, only the main connector is needed. The small secondary cable is not needed. When using a USB 2.0 port, both connectors might be needed as some computers output less power than others through the USB ports. On some PCs, one USB cable is enough, but to be safe and to avoid write errors, connecting both USB cables is highly recommended. If using only one USB connector, the main USB connector must be used, not the secondary connector (short cable) that is attached to the main connector.

Click to expand...

BDR-XD05B - 6x Slim Portable USB 3.0 BD/DVD/CD Burner. Supports BDXL™ format. Ultra lightweight. USB Bus Powered. CyberLink® software included.

Windows 10 whea uncorrectable error

NettleWarbler

Honorable Member

kemical

NettleWarbler

Honorable Member

nmsuk

Essential Member

kemical

Windows Forum Admin

kemical

Windows Forum Admin

Similar threads