A Microsoft Defender scan that appears stuck is not necessarily broken. A full scan can spend a long time working through large archives or a drive packed with files. But if the file count and scan status remain unchanged for an extended period, it is reasonable to investigate.

The steps below apply to Windows 10 and Windows 11. Start with the least disruptive checks: update Defender, restart Windows, and try a quick scan. If the problem persists, inspect the Defender service and consider an offline scan.

Before you begin: Save your work and allow more than 15 minutes if you need to run a full scan or repair Windows. On a work-managed PC, contact your IT administrator before changing security software or settings.

A laptop displays Windows Security scanning for threats, with restart and update options visible. 1. Give the scan room to work​

Microsoft notes that large disks and compressed archives, such as ZIP files, can make full scans slow. Other running programs can also compete for processor time and memory.

First:

  1. Close unnecessary applications.
  2. Check that the system drive has free space. Defender needs space to quarantine or remove detected threats.
  3. If the scan is clearly not progressing, save your work and restart the PC.
  4. After signing in, open Windows Security from Start.
  5. Select Virus & threat protection, then choose Quick scan.

A completed quick scan is a useful sign that Defender can scan, though it does not prove that a full scan will complete. If the quick scan works, try the full scan again when the PC can remain idle.

2. Update Defender’s security intelligence​

Security intelligence contains the information Defender uses to identify threats. Updating it is a sensible first step before trying another scan.

  1. Open Windows Security.
  2. Select Virus & threat protection.
  3. Under Virus & threat protection updates, select Protection updates if shown.
  4. Select Check for updates.
  5. When the check finishes, return to Virus & threat protection and run a quick scan.

The protection updates page also shows the installed intelligence version and its date. If no new update is available, that is not necessarily an error. If the update fails, note the error message before moving on.

If the update fails​

Check that the PC is connected to the internet, then check Windows Update:

  • Windows 11: Open Settings > Windows Update > Check for updates.
  • Windows 10: Open Settings > Update & Security > Windows Update > Check for updates.

If Windows Update also reports an error, Microsoft recommends its Windows Update troubleshooter. You can open the Get Help app and search for Windows Update troubleshooter, then follow its prompts. Restart and retry the Defender update afterward.

On a managed device, updates may come through an organization’s update infrastructure. A failed check is a good reason to give IT the exact error rather than changing update policies yourself.

3. Check the Defender antivirus service​

The service check helps distinguish a slow scan from a Defender component that is not running as expected.

  1. Press Windows + R.
  2. Type services.msc and press Enter.
  3. Find Microsoft Defender Antivirus Service.
  4. Check its Status.

On a PC using Defender as its primary antivirus, Microsoft’s service troubleshooting guidance lists this service, named WinDefend, as normally Running.

If it is stopped, restart Windows and check again. If it remains stopped or reports an error, record the message and check which antivirus product is active. A third-party antivirus can change how Defender operates; a stopped or unavailable Defender service should not automatically be treated as proof of malware.

Avoid forcing service settings through the registry or disabling security protections to make a scan run. On a work PC, an administrator may have deliberately configured the antivirus provider or management policies.

4. Run Microsoft Defender Offline​

If ordinary scans still stall—or you suspect malware is interfering—try Microsoft Defender Offline. It restarts the PC and scans from the Windows Recovery Environment, outside the normal Windows session, where persistent malware has less opportunity to hide.

  1. Save open files and close your applications.
  2. Open Windows Security > Virus & threat protection.
  3. Under Current threats, select Scan options.
  4. Select Microsoft Defender Antivirus (offline scan). The wording can vary slightly by Windows version.
  5. Select Scan now and confirm any prompt.
  6. Let the PC restart and complete the scan. It should restart into Windows afterward.
  7. Open Windows Security and select Protection history to review any detections or actions.

Microsoft describes this as an offline quick scan, not a substitute for a successful full scan of all your files. If it finds a threat, review the recommended action in Protection history. If the offline scan does not start or the PC cannot return to Windows, record any error and seek support rather than repeatedly forcing restarts.

5. Repair Windows files if scans still fail​

If Defender continues to malfunction after the update and restart, damaged Windows components are another possibility—not a diagnosis. Microsoft recommends running Deployment Image Servicing and Management, followed by System File Checker, to repair Windows files.

  1. Search for Command Prompt in Start.
  2. Right-click it and select Run as administrator.
  3. Run the following command and wait for it to finish:

DISM.exe /Online /Cleanup-image /Restorehealth

  1. If DISM reports that the operation completed successfully, run:

sfc /scannow

  1. Wait for verification to reach 100%, read the result, and then restart. Try a Defender quick scan again.

If DISM or SFC reports that it could not complete or repair files, keep the exact message for further troubleshooting. These tools repair Windows components; they are not malware scanners.

What success looks like​

The practical goal is a Defender update check that completes, a quick scan that finishes, and—if needed—a full scan that eventually completes without an error. Review Protection history for detections rather than assuming a finished scan means no action is required.

Windows 10 users should also plan for operating-system support. Microsoft ended standard support for Windows 10 Home and Pro on October 14, 2025; Extended Security Updates and some enterprise servicing editions have different terms. Keeping Defender’s intelligence current does not by itself restore full Windows support.