Identify the USB drive before changing its policy
These steps apply to USB flash drives and external USB hard drives or SSDs that Windows recognizes as disks. The setting belongs to the physical device, not to a folder, drive letter, or every USB drive on the PC. A phone that appears in File Explorer for photo transfers is not necessarily exposed as a disk and may not have these options.
Plug in the drive and open File Explorer > This PC. Note its drive letter and volume label, such as BACKUP (E🙂. Device Manager may show a model name or a generic USB disk name instead of that label. If several entries look alike, match the disk number before changing anything: open the candidate device’s Properties > Volumes, select Populate, and note the disk number. Then right-click Start, select Disk Management, and check that the same disk number in the lower pane contains the drive letter you noted. Don’t guess based on the order of the entries.
Finish any file copies, save and close files opened from the drive, and wait for any backup to finish. You don’t need to format the drive or change its drive letter to set a removal policy.
Set the removal policy in Device Manager
The Device Manager steps are the same in Windows 10 and Windows 11.
- Right-click Start and select Device Manager.
- Expand Disk drives. Right-click the USB disk you identified and select Properties. Use the disk entry, not a similarly named entry under Universal Serial Bus controllers.
- Open the Policies tab. Under Removal policy, note the current selection so you can restore it later. If you see a Write-caching policy section, note its settings too.
- Choose the removal policy:
- Quick removal: Select this if you regularly move the drive between computers or don’t want to depend on ejecting it every time. Windows does not cache disk writes under this policy. You can disconnect without using the eject command once activity has finished, but this setting does not make it safe to pull the drive during a copy, save, or backup.
- Better performance: Before selecting this, make sure you’re willing to eject the drive every time. Unplugging it with writes still pending can lose or corrupt data. Select Better performance and, if available, select Enable write caching on the device, as Microsoft recommends. If you see Turn off Windows write-cache buffer flushing on the device, leave it unchecked. That is a separate setting, not a requirement for Better performance.
- Select OK. If Windows asks you to restart, save your work and restart with the drive still connected before verifying the change.
Write caching lets Windows hold pending writes in memory and send them to the drive later. That can improve write performance, but it does not make the USB connection itself faster or guarantee a faster transfer. A copy window closing is not proof that all cached data has reached the drive. If you’re comparing the two policies, use the same files and USB port and include the time it takes to eject successfully, not just the time shown in the copy window.
Verify the setting and safely eject the drive
- Reopen Device Manager > Disk drives > your drive > Properties > Policies. Confirm that the intended removal policy is still selected. If you chose Better performance and enabled the write-caching checkbox, verify that it is still checked.
- When you’re ready to disconnect, finish transfers and close files and apps using the drive. In the taskbar’s system tray, right-click Safely Remove Hardware and Eject Media. If you don’t see it, first select the arrow for Show hidden icons.
- Select Eject for the correct device. Wait for Safe To Remove Hardware before unplugging. The drive should also disappear from the eject menu. With Better performance, don’t substitute a closed copy window or an idle activity light for a successful eject. With Quick removal, ejection is optional once the drive is no longer in use, but Microsoft Support recommends ejecting as a general precaution.
- If you want to check that the setting persists, reconnect the drive to the same USB port and reopen Policies. Microsoft documents that the selection persists when you reconnect the device to the same port on the same PC. If you move the drive to another port or computer, check the policy there before relying on it.
If the eject icon is not visible even under Show hidden icons, right-click the taskbar and select Taskbar settings. The next step differs by version:
- Windows 11: Expand Other system tray icons and turn on Safely Remove Hardware and Eject Media if it’s listed.
- Windows 10: Under Notification area, select Select which icons appear on the taskbar. Turn on Windows Explorer: Safely Remove Hardware and Eject Media. There can be more than one Windows Explorer entry, so check the full label.
Find the Policies tab through Disk Management
If you opened the correct disk in Device Manager but can’t find Policies, try Microsoft’s Disk Management route. It changes the same setting and works the same way on Windows 10 and Windows 11.
- Right-click Start and select Disk Management.
- In the lower pane, locate the physical disk that contains your USB drive’s letter. Right-click the disk label at the left of that row, such as Disk 2, and select Properties.
- Open Policies. If the first properties window has no Policies tab but does have a Hardware tab, open Hardware, select the USB drive under All disk drives, and select Properties again. Look for Policies in that second window.
- Once you find the tab, use the same policy choices and precautions as in Device Manager. Select OK, then reopen the tab to verify the selection.
Troubleshoot a missing drive, a failed eject, or an unwanted change
- The drive isn’t under Disk drives. Check whether it appears in Disk Management even if it has no letter in File Explorer. If Windows isn’t detecting it reliably, try connecting it directly to a different USB port instead of through a hub, and try another cable if the drive uses one. If Device Manager shows a yellow warning icon, open that device’s Properties > General and note the Device status and any error code. If a drive that contains files is shown as RAW, Unallocated, or Not Initialized, don’t format or initialize it to get to the Policies tab. Treat that as a separate drive-access problem.
- Windows says the drive is in use. Close documents and File Explorer windows showing the drive, and let backup or sync jobs finish. Try ejecting again. If Windows still refuses or the drive never appears in the eject menu, save your work and shut down the PC normally with the drive attached. Wait until the computer has fully shut down before disconnecting it. Sleep is not a substitute.
- Better performance didn’t help, or you want the old setting back. Finish any writes, return to the same drive’s Properties > Policies, and select the policy you recorded earlier. If your goal is to stop using write caching for this drive, select Quick removal. Select OK, restart if prompted, and reopen Policies to confirm the rollback. Changing the policy cannot recover data lost during an earlier disconnect.
- Neither tool offers a usable removal-policy setting. Don’t change a different disk or assume Quick removal is active. Use safe eject when available, and give the drive or enclosure manufacturer—or your IT support team on a managed PC—the model shown under Disk drives, your Windows version, and any Device status error code.