If your pen won’t write in Windows 11 or Windows 10 (22H2), check that the pen and screen are compatible, inspect the tip, and charge the pen or replace its battery. Then try drawing in another app. If the tip works but the top button doesn’t, check Bluetooth and Pen & Windows Ink. If the pen won’t draw in any app, especially if finger touch has also stopped working, check the touchscreen and pen devices in Device Manager. A pen showing up as paired does not prove the screen can read its tip.
Check compatibility, the tip, and the battery
- Match the exact pen and PC models. Find your PC model in the manufacturer’s specifications and check its list of supported pens. A touchscreen that responds to a finger does not necessarily support an active pen. For a Surface Pen on a non-Surface PC, Microsoft recommends checking the Microsoft Pen Protocol (MPP) version listed for the PC against the version listed for the pen. For a Surface, check Microsoft’s compatibility table for the exact model; for example, Surface Laptop Go models don’t support Surface Pen or Surface Slim Pen inking. If the pen has never worked on this screen, confirm compatibility before changing drivers.
- Inspect the writing tip. Look for a broken, worn, loose, or missing tip. If it needs replacement, use a tip made for your exact model and follow the manufacturer’s instructions. On Surface Pen models covered by Microsoft’s tip replacement instructions, use tweezers to slide out the old tip, then push the narrow end of the replacement into the pen until it locks. Don’t pull out a good Surface Slim Pen 2 tip just to see whether reseating it helps; Microsoft says removal is intended for replacement and warns that repeated removal can damage the pen.
- Check power using the method for your pen. Charge a Surface Slim Pen or Slim Pen 2 with a compatible charging accessory or a Surface model that supports charging it. Neither has a user-replaceable battery. If your pen takes a replaceable battery, check the type and orientation before installing it. For example, the Surface Pen with no clip takes an AAAA battery with the positive end toward the tail, not the tip. On a Surface Pen with a status light, red or amber indicates low power. If the pen is already paired to a Surface, you can also open the Surface app and select the pen from the connected accessories to see its battery level.
Find out whether the problem affects one app or all apps
- Restart Windows and try a blank canvas. Save your work, then select Start > Power > Restart. After signing back in, open Paint, choose Pencil, and use the pen tip to draw several lines on the canvas without pressing any buttons. If Paint is the app that failed, try a blank page in the desktop OneNote app instead: open Draw, select a pen, and write on the page. The test is whether a visible line follows the tip, not whether the pen moves the pointer or launches an app.
- Compare the results before changing anything. If the pen draws in the second app, go back to the original app and select its drawing or annotation tool. If it still fails only there, check that app’s pen support rather than reinstalling a Windows driver. If neither app draws, try tapping a Windows control with your finger if the display supports finger touch. When both touch and ink fail, prioritize the display’s input devices and drivers. When touch works but ink doesn’t, the pen, its compatibility, or the screen’s pen input can still be at fault.
Check Windows Ink settings and reconnect a Bluetooth pen
- Open the pen settings for your Windows version. On Windows 11, go to Start > Settings > Bluetooth & devices > Pen & Windows Ink. On Windows 10, go to Start > Settings > Devices > Pen & Windows Ink. Check the assigned shortcut if the top button is the problem. The settings on this page customize pen behavior; there’s no master Windows Ink switch here that makes an unsupported screen accept pen input. If the tip already writes, test the assigned shortcut separately.
- Reconnect only if your pen supports Bluetooth. Some models, including Microsoft Classroom Pen 1 and 2, don’t pair at all. On many active pens, Bluetooth runs shortcut features separately from writing, so skip re-pairing if the shortcut already works and only the tip is failing. Removing the pen clears its saved pairing; if it isn’t already listed, don’t remove anything.
- Windows 11: Open Start > Settings > Bluetooth & devices and turn Bluetooth on. To clear an old pairing, open Devices, select More options (…) next to the pen, then select Remove device > Yes.
- Windows 10: Open Start > Settings > Devices > Bluetooth & other devices and turn Bluetooth on. Select the old pen entry, then select Remove device > Yes.
- Put the pen in pairing mode. On a Bluetooth-capable Surface Pen, hold the top button for about 5–7 seconds, until the light flashes continuously. For other pens, use the manufacturer’s pairing instructions.
- On Windows 11, select Add device > Bluetooth. On Windows 10, select Add Bluetooth or other device > Bluetooth. Select the pen by name, follow any prompts, and select Done. Try the top-button shortcut and draw another line. A successful shortcut confirms the Bluetooth feature works; the line confirms the tip works.
Check the touchscreen and pen drivers in Device Manager
- Inspect the relevant devices. Right-click Start, select Device Manager, and expand Human Interface Devices. Look for HID-compliant touch screen and, if your PC exposes it under that name, HID-compliant pen. Names vary by model. If the relevant device has a warning icon, right-click it, select Properties, and note the message under Device status on the General tab. If the touchscreen is supposed to be active but its entry offers Enable device, select it and retest. Don’t disable working entries or uninstall devices just because the names look similar.
- Check for the driver that matches your PC. Save your work and keep a mouse and keyboard available before updating an input driver. If the failure began immediately after a driver update, try the rollback below before installing another one. Otherwise, start with Windows Update:
- Windows 11: Go to Start > Settings > Windows Update > Check for updates. For optional hardware drivers, open Advanced options > Optional updates.
- Windows 10: Go to Start > Settings > Update & Security > Windows Update > Check for updates. Select View optional updates if it appears.
Verify the repair or narrow down what failed
- Ink works after a restart: Draw continuous lines in the test app and then in the app where the problem started. If your pen has a Bluetooth shortcut, check it separately. You don’t need to change anything else if both features you use now work.
- The pen never appears for pairing: On a Bluetooth-capable Surface Pen, a light that flashes for only a couple of seconds can mean the pen is still paired to another nearby Surface. Remove it from that Surface’s Bluetooth list and retry on the intended PC. If the light doesn’t come on after charging or installing the correct fresh battery, contact the pen manufacturer. If other Bluetooth accessories also fail, investigate the PC’s Bluetooth adapter rather than the pen driver.
- A driver update made input worse: In Device Manager, right-click the affected device and choose Properties > Driver > Roll Back Driver. Choose a reason, select Yes, and restart if prompted. If rollback is unavailable, ask the PC maker or your IT team for the correct recovery package rather than removing unrelated input devices.
- Nothing writes after the checks: If available, try a known-good compatible pen on your PC, or try your pen on another screen confirmed to support it. If another pen writes on your PC, focus on the original pen. If neither pen writes, especially if finger touch also fails or the expected input device is still missing, contact the PC maker or your IT team with the exact models, the apps you tested, and any Device Manager error code.