📎 AI Summary:
The WindowsForum thread discusses a recurring Blue Screen of Death (BSOD) issue on a newly built system, with initial troubleshooting suggesting driver updates and system file checks. Despite some improvements, the user experiences subsequent BSODs indicating possible memory corruption, prompting recommendations to run Memtest86 for RAM testing. The overall sentiment is supportive and diagnostic, with advice focused on hardware and driver verification to resolve the persistent BSOD problem.

TacticalQuit

New Member
Member details
Joined
Apr 29, 2014
Messages
29
Thread Author #1
I posted once before about this issue with an older set of parts. I followed the suggestions in it and after removing norton, the problems went away. I'll post it here in case it helps.

I got a new mobo/proc and now the Bsod demon is back.

New System Specs are:
Z97 Maximus VII Hero
i7 4790k
4x Corsair Vengeance 1600MHz
2x R9 290x gfx card
2x Samsung 840 Pro 128GB on RAID0
1x 3TB HDD

Windows 8.1 update 1

I'm getting random blue screens out of no where. When I got the board, I kept getting SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys) in a boot loop, but those seem to have gone away. I also now have a DAC attached, but as it uses no drivers I'm not sure if it could be the problem.

Any help would be very much appreciated
 

Attachments

Last edited:
Solution
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 109, {a3a01f59f21af71c, b3b72be0449a2df7, fffff8001fc07ea4, 1}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption
Hi...

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
I decided to read through your thread again as the Event logs weren't helping much and the thought suddenly struck me - when you bought the new parts and fitted them did you do a clean install of windows? Usually it's best to do a clean install whenever fitting something like a new motherboard...
 

TacticalQuit

New Member
Member details
Joined
Apr 29, 2014
Messages
29
Thread Author #42
Yes I did.

I havent had any bsods since I took out 2 of the ram sticks, so I'm beginning to think I might actually have been the ram.
 

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
When you say the system no longer fast boots, how do you know? Is the check box still ticked in the Power options section of the Control panel?
 

TacticalQuit

New Member
Member details
Joined
Apr 29, 2014
Messages
29
Thread Author #44
Well. It seems to have fixed itself. And tbh I was judging it unobjectively. When it fastboots, there is no loading circle after the post and it actually booted much faster.
 

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
Sounds good... How is the system generally? No more bsod?
 

TacticalQuit

New Member
Member details
Joined
Apr 29, 2014
Messages
29
Thread Author #46
Doesn't seem like it. I think we fixed the problem. Thanks for helping me with this.
 

TacticalQuit

New Member
Member details
Joined
Apr 29, 2014
Messages
29
Thread Author #48
I just want to confirm it was a single faulty memory stick. Since removing it I haven't seen any peculiar behaviour.
 

kemical

Essential Member
Member details
Joined
Aug 28, 2007
Messages
36,163
Thanks for updating Tactical.. Post back if you should need to and best of luck.. :)