Windows 10 Unexpected Store Exception Error and crash

Neemobeer said:

Follow this post to upload your dmp files so we can help resolve the issue. How to ask for help with a BSOD problem

Click to expand...

kemical said:

Hi,
just to add to Neemobeer's excellent advice, as well as uploading any dump files you may have, try running these scans too:
File scans
Right click on the Start menu icon and from the revealed list choose 'admin command prompt'. Type:
sfc /scannow
press enter and await results

In the same command prompt and after the above scan has finished type:
dism /online /cleanup-image /restorehealth
Press enter and await results (longer this time).

If the first scan found files it could not repair but the second scan is successful, run the first scan again using the same command prompt box and this time it should repair the files found.


Thread moved to correct section.

Click to expand...

Badria Jabali said:

Thank you for your advice I will do so once I see the result of having the latest updates for Windows 10 which I am running now

Click to expand...

Neemobeer said:

Follow this post to upload your dmp files so we can help resolve the issue. How to ask for help with a BSOD problem

Click to expand...

kemical said:

Hi,
just to add to Neemobeer's excellent advice, as well as uploading any dump files you may have, try running these scans too:
File scans
Right click on the Start menu icon and from the revealed list choose 'admin command prompt'. Type:
sfc /scannow
press enter and await results

In the same command prompt and after the above scan has finished type:
dism /online /cleanup-image /restorehealth
Press enter and await results (longer this time).

If the first scan found files it could not repair but the second scan is successful, run the first scan again using the same command prompt box and this time it should repair the files found.


Thread moved to correct section.

Click to expand...

kemical said:

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 7A, {4, 0, ffffb106645923c0, 7eb4d30}

*** WARNING: Unable to verify timestamp for win32k.sys
*** ERROR: Module load completed but symbols could not be loaded for win32k.sys
Probably caused by : memory_corruption

Followup: memory_corruption

Hi,
this bugcheck is created when kernel data cannot be read into memory causes can include HDD issues, memory issues and viral infection.
Looks like your running MSE? If so please remove and just use the onboard Defender.

Can you please go through your driver list and update using only the drivers from your systems support page:
http://support.toshiba.com/support/modelHome?freeText=3520517

If the bsod continues then you'll need to test your RAM. Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away.
Memtest86+ - Advanced Memory Diagnostic Tool

Run a chkdsk:
Link Removed

Please post any results and/or dump files.

Click to expand...