📎 AI Summary:
The thread discusses a user's decrease in FPS performance on Windows 8 compared to Windows 7, especially in gaming. The user receives advice on updating BIOS and drivers, checking hardware compatibility, and optimizing settings, which ultimately restores and improves FPS beyond previous levels. The overall sentiment is positive, with the issue resolved and performance enhanced after following the suggested steps.
The thread discusses a user's decrease in FPS performance on Windows 8 compared to Windows 7, especially in gaming. The user receives advice on updating BIOS and drivers, checking hardware compatibility, and optimizing settings, which ultimately restores and improves FPS beyond previous levels. The overall sentiment is positive, with the issue resolved and performance enhanced after following the suggested steps.
Solution
Well sir,
I am using :
Windows 8 pro x64
Motherboard : Gigabyte H61M-d2-B3
Processor : Intel core i3
RAM : 4GB ddr (2*2)
VGA : 2 GB
and sorry What's BIOS ? I don't think I have downloaded it :S
Last edited by a moderator:
kemical
Essential Member
- Joined
- Aug 28, 2007
- Messages
- 36,160
Hi,
thank you for the information although it would help me further if you could post the make of your graphics card.
As Windows 8 is a new operating system it is extremely important to be running with the latest drivers and bios. This utility will enable you to flash the bios:
@BIOS
You must follow the instructions to the letter and if your unsure of anything then post back and I'll guide you through it. Gigabyte boards are blessed with a back up bios or dual bios so flashing isn't as risky as with other boards. Get it wrong and the back up bios will kick in.
Your motherboards website is here:
Link Removed
Make sure that you have the correct board version, either 1.1 or 1.0. You can find out which one you have by actually looking at your motherboard inside the case. It's usually printed on the board around the edge.
You can also use the drivers listed under windows 8. They might not actually be the latest but better than nothing.
thank you for the information although it would help me further if you could post the make of your graphics card.
As Windows 8 is a new operating system it is extremely important to be running with the latest drivers and bios. This utility will enable you to flash the bios:
@BIOS
You must follow the instructions to the letter and if your unsure of anything then post back and I'll guide you through it. Gigabyte boards are blessed with a back up bios or dual bios so flashing isn't as risky as with other boards. Get it wrong and the back up bios will kick in.
Your motherboards website is here:
Link Removed
Make sure that you have the correct board version, either 1.1 or 1.0. You can find out which one you have by actually looking at your motherboard inside the case. It's usually printed on the board around the edge.
You can also use the drivers listed under windows 8. They might not actually be the latest but better than nothing.
sorry for late answer I wasn't in home
my vga is the pint in one which comes with the motherboard, I found that my board is 1.0 but I installed the 1.1 ? :S
is that wrong for my drivers ?
and when I tried to install the BIOS I got this msg
Link Removed
thx.
yours,AlaaEmad
kemical
Essential Member
- Joined
- Aug 28, 2007
- Messages
- 36,160
Either follow Richards advice above or download the app found here: @BIOS
Install it and then run it. It's probably the easiest way of doing things. Tell me, do you have your motherboard manual? If not I suggest you download it at the above gigabyte site:
Link Removed
Give it a good read as it's invaluable for helping you with bios settings ect..
Install it and then run it. It's probably the easiest way of doing things. Tell me, do you have your motherboard manual? If not I suggest you download it at the above gigabyte site:
Link Removed
Give it a good read as it's invaluable for helping you with bios settings ect..
kmstrube81
New Member
- Joined
- Jan 30, 2013
- Messages
- 11
Just worth checking for as well incase this was a clean install of Windows 8, Make sure power settings are set to performance. Its set to powersaver by default in Windows 8
kemical
Essential Member
- Joined
- Aug 28, 2007
- Messages
- 36,160
Thx @kemica
solved now
Wonderful! Thanks for updating your thread too.
Similar threads
- Article