M

ManKzin

New Member
Joined
Nov 2, 2009
Messages
2
Tried and Tired

Connecting 2-3 XP Pro PCs and 1 Windows 7 PC Ultimate to a "Linksys EFAH05W 5 Port Hub".

My Neighbor and I share a wireless routher "DLink WBR-2310"

I have set-up the Windows 7 PC as my main "Host" Computer, it has two network adapters

1. "Intel Pro 10/100 VE Network Connection", which I am using to connect to the "Linksys EFAH05W 5 Port Hub" (I have at one point gotten all the PCs to see each other and access shared folders, How? I don't know been a long day)

2. "D-Link AirPlus DWL-G520 Wireless PCI Adapter (rev B)" which I use to connect to the wireless router "DLink WBR-2310"

I am very new to networking various computers so that they are able to interact with each other. I am hoping that
someone can give me a very detailed step-by-step resolution to this particular situation, not only for my benefit and educatioin but for oithers as well.

P.S. The reason why I just don't put every PC on a wireless adapter (besides the cost) is that I am only able to pick up the wireless router "DLink WBR-2310" in one corner of my house and I finallly have collected enough PC to connect all the rooms in my house.


Thank you in advance
"Mankzin"
 

Solution
WindowsForum AI
It seems like you are dealing with setting up a network with multiple PCs running Windows XP Pro and Windows 7 Ultimate, connected through a combination of a wired hub (Linksys EFAH05W 5 Port Hub) and a shared wireless router (DLink WBR-2310). The main host computer is running Windows 7 and has two network adapters, one for the wired connection to the hub and the other for wireless connection to the DLink router. Here is a detailed step-by-step guide to help you set up your network:

Step 1: Physical Connections​

  • Connect all the XP Pro PCs and the Windows 7 PC to the Linksys hub using Ethernet cables.
  • Ensure that the Windows 7 PC is connected to the DLink WBR-2310 wirelessly.

Step 2: Configure Network Settings on...​

Sort by date Sort by votes
WindowsForum AI

WindowsForum AI

AI
Staff member
Robot
Joined
Mar 14, 2023
Messages
114,059
It seems like you are dealing with setting up a network with multiple PCs running Windows XP Pro and Windows 7 Ultimate, connected through a combination of a wired hub (Linksys EFAH05W 5 Port Hub) and a shared wireless router (DLink WBR-2310). The main host computer is running Windows 7 and has two network adapters, one for the wired connection to the hub and the other for wireless connection to the DLink router. Here is a detailed step-by-step guide to help you set up your network:

Step 1: Physical Connections​

  • Connect all the XP Pro PCs and the Windows 7 PC to the Linksys hub using Ethernet cables.
  • Ensure that the Windows 7 PC is connected to the DLink WBR-2310 wirelessly.

Step 2: Configure Network Settings on Windows 7 PC​

  • Identify Network Adapters:
  • Open "Control Panel" > "Network and Sharing Center."
  • Click on "Change adapter settings" to see the list of network adapters.
  • Assign Static IP Addresses:
  • Right-click on the wired network adapter (Intel Pro 10/100 VE Network Connection) > Properties > IPv4.
  • Choose "Use the following IP address" and set:
  • IP Address: 192.168.1.1
  • Subnet Mask: 255.255.255.0
  • Leave other fields empty or set to default.
  • Enable File and Printer Sharing:
  • Go to "Network and Sharing Center."
  • Change advanced sharing settings.
  • Enable network discovery, file sharing, and printer sharing for the respective network profile.
  • Set Workgroup Name:
  • Ensure all PCs are part of the same workgroup.
  • Right-click on My Computer > Properties > Computer Name > Change.
  • Set the workgroup name (e.g., WORKGROUP for all PCs).

Step 3: Configure Sharing on Windows 7 PC​

  • Share Folders:
  • Right-click on the folders you want to share > Properties > Sharing.
  • Share the folder with appropriate permissions.
  • Share Printer:
  • Connect the printer to the Windows 7 PC.
  • Share the printer through the "Devices and Printers" settings.

Step 4: Configuring Windows XP Pro PCs​

  • Assign Static IP Addresses:
  • Follow similar steps as in Step 2 to assign static IP addresses to the XP Pro PCs.
  • Join the Workgroup:
  • Right-click on My Computer > Properties > Computer Name > Change.
  • Join the same workgroup as the Windows 7 PC (WORKGROUP).
  • Access Shared Resources:
  • Open My Network Places > View Workgroup Computers.
  • You should see shared folders and printers from the Windows 7 PC.

Step 5: Troubleshooting​

  • Firewall Configuration:
  • Disable or configure firewalls on all PCs to allow file and printer sharing.
  • Testing Connectivity:
  • Ping between PCs to ensure connectivity.
  • Further Assistance:
  • If issues persist, check detailed error messages and seek help for specific troubleshooting steps. I hope these steps help you in setting up your network successfully. Please let me know if you encounter any issues along the way.
 

Upvote 1 Downvote
Solution
You must log in or register to reply here.

Similar threads

C
  • Solved
Windows Vista Win 7 internet issues
Replies
7
Views
7K
cgreco
cgreco