Blue screen KERNEL_DATA_INPAGE_ERROR

Discussion in 'Windows 7 Blue Screen of Death (BSOD)' started by madangee1984, Aug 21, 2015.

  1. madangee1984

    Joined:
    Aug 21, 2015
    Messages:
    1
    Likes Received:
    0
    Hi,

    I have been getting frequent blue screens lately .. Like whenever laptop goes to sleep and appication gets stuck.

    I am attaching dump and sysdata with this.

    PLs help.

    -Madan
     

    Attached Files:

  2. kemical

    kemical Windows Forum Admin
    Staff Member Premium Supporter Microsoft MVP

    Joined:
    Aug 28, 2007
    Messages:
    31,788
    Likes Received:
    1,563
    Code:
    *******************************************************************************
    *                                                                             *
    *                        Bugcheck Analysis                                    *
    *                                                                             *
    *******************************************************************************
    
    Use !analyze -v to get detailed debugging information.
    BugCheck 7A, {c04eaa78, c0000185, 38b4bbe0, 9d54f000}
    Probably caused by : memory_corruption ( nt!MiWaitForInPageComplete+302 )
    
    Followup: MachineOwner
    
    Hi,
    the above bugcheck can be caused by a number of things ranging from Hard drive issues, failing RAM and Malware. The dump file also shows this error status:
    Code:
    ERROR_CODE: (NTSTATUS) 0xc0000185 - The I/O device reported an I/O error.
    DISK_HARDWARE_ERROR: There was error with disk hardware
    
    If possible you need to check the connections to the HDD. Also try running a chkdsk:
    The How-To Geek Guide to Using Check Disk in Windows 7, 8, or 10
    Please ensure you tick the check boxes to check for and repair broken sectors.

    As it's a sleep issue just try opening the advanced power options and making sure 'Hybrid sleep' is enabled.

    Can you also post the make and model of your machine as it was difficult to find online with the information I had.

    If the bsod continues then you'll need to test your RAM. Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
    If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
    You must test for at least 12 hours unless it becomes obvious there is a problem straight away (you'll see errors outlined in red.
    Memtest86+ - Advanced Memory Diagnostic Tool

    Post any new dump files.
     

Share This Page

Loading...