blue screen of death happens allot don't know what the cause is

#1
hey this is my first post and i have recently re installed windows 7 bit i keep getting blue screens of death with the code of IRQL less or not equal. if anyone has a chance to look though them it would be amazing
 


Attachments

kemical

Windows Forum Admin
Staff member
Premium Supporter
Microsoft MVP
#2
Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck A, {fffffa980608d220, 2, 1, fffff800028e6150}

Probably caused by : memory_corruption ( nt!MiReplenishPageSlist+c0 )

Followup: MachineOwner
Hi,
all your dump files are the same Bugcheck as the above and errors which produce this type of Bugcheck range from faulty RAM, faulty device drivers, incorrect Bios and faulty system software. Most of the dumps blamed the system kernel apart from two, one of which is above, which blamed memory corruption.
I see that your motherboard is this:
http://www.gigabyte.com/products/product-page.aspx?pid=4815#bios (ensure I have the correct motherboard version or revision too. Either 1.0 or 1.1. or 1.2 you'll find it written on the actual motherboard)
Your Bios is the latest version.
BiosVersion = F7
BiosReleaseDate = 07/13/2012
SystemManufacturer = Gigabyte Technology Co., Ltd.
SystemProductName = H61M-D2H-USB3


Looks like your missing one or two drivers too. If you follow the link above you will find the driver section. Please update where necessary.

netr7364.sys Wed Jun 17 10:18:51 2009: Ralink RT2501/RT2573/T2601/RT2671 Wireless Adapter (might be different manufacturer) please update:
http://www.mediatek.com/en/downloads/

If after making the above changes you still get the bsod then you need to test your RAM.
Windows does have it's own memory testing app but it can often miss errors and the best app for the job is Memtest86. The latest version of which can be found here:
http://www.memtest.org/

To run Memtest86 you need to either burn a copy of it to disk or use a USB stick. If you look down the page you'll eventually find the latest version and it's associated downloads. If your burning to disk choose the pre-compiled iso zip. If your using a USB method then the corresponding download is the auto installer for a USB stick.
Once you have Memtest86 on the media you selected you'll then need to enter your bios and change the boot order so that the machine will boot from either the disk or stick you have Memtest86 on.
Try and run the test overnight if possible unless it becomes clear that there is a issue. If there is a problem with the RAM you'll see the errors pop up in red so you can't miss them.

Post any new dump files.
 


This website is not affiliated, owned, or endorsed by Microsoft Corporation. It is a member of the Microsoft Partner Program.