Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 116, {fffffa800d5a30b0, fffff880048e2dac, 0, 2}
*** WARNING: Unable to verify timestamp for atikmpag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmpag.sys
Probably caused by : atikmpag.sys ( atikmpag+bdac )
Followup: MachineOwner
Hi,
as stated in my original post your dump files are varied ranging from: 0x116 which is a TDR, GPU was shutoff to stop damage, 0x1A Memory corruption, 0x124 machine check exception again usually caused by a hardware error.. (not to mention Bugcheck 24 NTFS issues and Bugcheck 3B which can mean amongst other things a hardware fault too)
As you ran the verifier this also points to a possible hardware problem as opposed to a driver issue otherwise the verifier would have caught the offending driver.
Let's run some basic tests to check for possible faults:
CPU
Try running Intel's diagnostic test:
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=19792
Stress test with Prime95. Watch your temps please:
http://www.mersenne.org/download/
GPU
Test the cards RAM:
http://mikelab.kiev.ua/index_en.php?page=PROGRAMS/vmt_en
Stress test using Furmark. Watch your temps please:
http://www.ozone3d.net/benchmarks/fur/
RAM
Windows does have it's own memory testing app but it can often miss errors and the best app for the job is Memtest86. The latest version of which can be found here:
http://www.memtest.org/
To run Memtest86 you need to either burn a copy of it to disk or use a USB stick. If you look down the page you'll eventually find the latest version and it's associated downloads. If your burning to disk choose the pre-compiled iso zip. If your using a USB method then the corresponding download is the auto installer for a USB stick.
Once you have Memtest86 on the media you selected you'll then need to enter your bios and change the boot order so that the machine will boot from either the disk or stick you have Memtest86 on.
Try and run the test overnight if possible unless it becomes clear that there is a issue. If there is a problem with the RAM you'll see the errors pop up in red so you can't miss them.
SSD
Run a chkdsk
http://www.howtogeek.com/howto/windows-vista/guide-to-using-check-disk-in-windows-vista/
As you have dump files from almost every component they all can't be faulty and I wonder if you have a possible short within the case or a loose connection somewhere that only impacts intermittently when perhaps the case is knocked or similar? Food for thought.. Try checking all connections.
Also check within the bios itself. I found when building my first system the motherboard manual to be invaluable and it's handy to have when checking certain settings.