Windows 7 BSOD with FS2004?

[teamfsx]

Hello and Best Wishes to All.

I can link the BSOD repeatedly since the installation of my new tower in September 2010.
I noticed that this happened very often when I was a flight on Flight Simulator 2004.

I do not know what to do and hope you can help me

 

[teamfsx]

Re: [langtitle=fr]Re: Merci Cyber, je regarde tout ça ce soir et vous tiens au courant.[/langtitle]

[lang=fr]Oui Cyber je veux bien mais en voulant remettre par défaut dans le bios, j'ai seven qui plante lors de son chargement

BSOD Erreur 0x0000007B[/lang]

[lang=fr]je voudrais bien mais... je peux point ^^[/lang]

 

[cybercore]

Re: STOP 0X124

One 0x124 error outweighs all other error codes. If 0x124 has no driver offset, it means faulty hardware.

 

[cybercore]

Re: STOP 0X124

121510-19437-01.dmp, 121210-17752-01.dmp, 120510-18408-01.dmp
WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred
0x124_GenuineIntel_PROCESSOR_CACHE
Probably caused by : hardware


1. No overclocking, all frequencies should be in strict accordance with the ones specified by the manufacturer
2. No overheating
3. You may want to reformat and reinstall, but if you keep getting 0x124 errors - replace the hardware.

 

[teamfsx]

[langtitle=fr]Re: STOP 0X124[/langtitle]

[lang=fr]Demain, je tenterai de remettre par défaut après avoir débrancher tous les USB.
Niveau chaleur, je tourne à 50°C CPU, 35°C CM, 45 et 35°C les CG et 36°C NB + SB (watercooling) avec FS2004 lancé.

Si après formatage j'ai le même problème, quel matériel est à remplacer??

Sinon peut être retourné sous un XP 64 bits...[/lang]

 

[cybercore]

Re: [langtitle=fr]Re: STOP 0X124[/langtitle]

Oh well, on page 1 I asked you to load optimized defaults and so far you haven't been able to follow that. You need to wait till tomorrow. Good luck. : )

 

[teamfsx]

Re: [langtitle=fr]Re: STOP 0X124[/langtitle]

Oh well, on page 1 I asked you to load optimized defaults and so far you haven't been able to follow that.

[lang=fr]je ne comprend pas ta phrase cyber, désolé :s[/lang]

 

[cybercore]

Re: [langtitle=fr]Re: STOP 0X124[/langtitle]

Oh well, on page 1 I asked you to load optimized defaults and so far you haven't been able to follow that. You need to wait till tomorrow. Good luck. : )

Do not overclock.

 

[teamfsx]

Re: [langtitle=fr]Re: STOP 0X124[/langtitle]

OK Cyber, that's what I thought.
I'll try to put all this by default without having the 0x0000007B BSOD at windows startup.

Otherwise, the SP1 can it solve my problem?

Again thank you for your patience Cyber

 

[cybercore]

SP 1 will not solve 0x124.

SP 1 will not solve 0x124.

 

[cybercore]

Re: SP 1 will not solve 0x124.

To try to fix your stop 0x124, reduce the overclocking to 0%. Then reformat and reinstall the operating system.

 

[teamfsx]

[langtitle=fr]Re: SP 1 will not solve 0x124.[/langtitle]

[lang=fr]J'ai réduit le FSB à 133 MHz au lieu de 200MHz avec un multi de 21 pour revenir à une base.
J'ai déjà fait plusieurs test sous FS2004 et pas de BSOD pour le moment.

Si c'est vraiment ça, je mettrai aussi le processeur en watercooling

Affaire à suivre [/lang]

 

[cybercore]

Re: [langtitle=fr]Re: SP 1 will not solve 0x124.[/langtitle]

Sounds inspiring. : )