When installing win 7 RC 7100, my printer is recognized as scanner (can't set as printer).
On site HP, no drivers for vista are availabel (says "it's in Vista")
Older version of Win 7 (think 7054) was OK, now not anymore.
Help !!
You can manually install your printer from the list of drivers for HP in Windows 7. Just go to Windows update and update your drivers from MS website. The hp 1300 series is on there list. I believe the mulifunction printers use DOT ports.
Just go to Add Printer and download new drivers.
click on start click on devices and printers click on add printers click on USB, if your printer is USB read the list of printers that is listed if your printer is not listed click on update printers this should refresh the list and your printer should be listed now install printer
Dear,
I tried, when i come to instale printer, USB is not a possibility...
The PSC is on the printerlist, but oly as scanner, not as printer.
Other possibilitys?
When I try to update, system says "driver not found".
Help pls
it's in French but it can help, on the second link you shall install the detection plug, then it will display all hardware you can get and propose the best drivers available. Hope it can help...
I joined because i have similar issues with win 7 64 and a PSC 1355.
I have followed above method and win 7 finally installed the printer and not just as a scanner, but it will not print.
when I try to print a test page the test page is queued to my printer but nothing happens.
I have tried switching from port LPT1 to USB 1 but no luck.
I currently have installed the 1300 series driver. I have also tried the 1310 series both without any luck.
Any ideas
can it by my printer cable there's causing the problem?
I using the original cable that came with the printer. Should i buy a new USB 2.0 or 3.0 cable?