Code:
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 1A, {403, fffff6bffc110e00, 1a00000112845005, ffffc000be4b60f8}
Probably caused by : ntkrnlmp.exe ( nt! ?? ::FNODOBFM::`string'+1164c )
Followup: MachineOwner
Hi,
you have a number of different dump files which may look like this is a hardware issue. Bugchecks 50, 124 and 1A can all be hardware related although it is also possible that some out of date driver is causing these crashes too. I did have some difficulty determining whether you had a laptop or a pc so if my info is off a little I apologise.
You do have some old chipset drivers running:
amdiox64.sys Thu Feb 18 15:17:53 2010: AMD IO Driver. Please update your chipset by running the drivers found on your motherboards support page. You will have to look under the windows 7 section and they are at the very bottom. If they refuse to install try compatibility mode. These are dated 2014 so a lot better than your current versions
Motherboard - The world leader in motherboard design | MSI Global
AODDriver2.sys Tue Sep 06 08:11:44 2011: This driver is sometimes seen in AMD's overdrive (overclocking app) and AMD gpu drivers. If you do not need it please remove it.
AtiPcie64.sys Wed Mar 10 14:33:45 2010: AMD PCIE Filter Driver. These are also found in AMD gpu drivers and if are not needed should be removed.
ElcMouLFlt.sys Tue Oct 05 00:30:57 2010: As far as I can gather this belongs to Kaspersky and needs to be at least updated. A bugcheck 50 can also be caused by AV applications so it's worth updating.
usbfilter.sys Mon Nov 29 09:50:21 2010: AMD USB Filter Driver (likely part of the chipset drivers). See above.
Please ensure the inside of the pc is free from dust. Use a small paintbrush or similar to remove any build up. One of your Bugchecks can be caused by heat issues so make sure your not getting too warm. Check your running temperatures using this app:
HWiNFO, HWiNFO32/64 - Download
If the bsod continues then you'll need to test your RAM. Windows does have a memory testing app but it can miss errors and the best app for the job is Memtest86.
If you open the link below you'll see you can run Memtest86 in two ways. You can either burn it to disk or install it onto a USB drive it's entirely up to you. You'll then need to enter the bios to change the boot order so you can boot from either the Disk or USB stick you have Memtest86 on.
You must test for at least 12 hours unless it becomes obvious there is a problem straight away.
Memtest86+ - Advanced Memory Diagnostic Tool
Please run a chkdsk making sure that whichever method you use that you search for and repair broken sectors:
Link Removed
Post any new dump files.