gezafisch
New Member
- Joined
- Nov 18, 2014
- Messages
- 13
- Thread Author
-
- #1
Hello,
I have Windows Vista installed on my computer. I am going to install Windows 10 64-Bit from a Flash Drive. When I boot from the flash drive to install windows 10, will it give me an option to partition the drive so I can keep Windows Vista?
Thanks
Geza
I have Windows Vista installed on my computer. I am going to install Windows 10 64-Bit from a Flash Drive. When I boot from the flash drive to install windows 10, will it give me an option to partition the drive so I can keep Windows Vista?
Thanks
Geza
Solution
1. Before you do all thoe operations, make an image of your Vista system. If anything goes wrong, you can at least backpaddle.
http://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html?ltr=I
2. I think you would be much better off running the Windows 10 in a virtual partition. Here is a tutorial for Windows 8, but it works the same for 10.
http://www.eightforums.com/tutorials/2899-vmware-player-install-windows-8-a.html
3. Here is a tutorial on how to setup a dual boot Vista/8 - it should be the same for 10 although I have not yet tried that (I run 10 in virtual)
http://www.eightforums.com/tutorials/2344-dual-boot-installation-windows-8-windows-7-vista.html
http://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html?ltr=I
2. I think you would be much better off running the Windows 10 in a virtual partition. Here is a tutorial for Windows 8, but it works the same for 10.
http://www.eightforums.com/tutorials/2899-vmware-player-install-windows-8-a.html
3. Here is a tutorial on how to setup a dual boot Vista/8 - it should be the same for 10 although I have not yet tried that (I run 10 in virtual)
http://www.eightforums.com/tutorials/2344-dual-boot-installation-windows-8-windows-7-vista.html
kemical
Essential Member
- Joined
- Aug 28, 2007
- Messages
- 36,176
Hi,
your probably better off creating the partition through Vista. Open the control panel and head for admin tools (found under System and Security). Look for computer management, Storage and finally Disk management. Find the HDD you want to create the partition in and right click on it. You'll need the 'shrink volume' option through which you can create whatever size partition you want.
your probably better off creating the partition through Vista. Open the control panel and head for admin tools (found under System and Security). Look for computer management, Storage and finally Disk management. Find the HDD you want to create the partition in and right click on it. You'll need the 'shrink volume' option through which you can create whatever size partition you want.
kemical
Essential Member
- Joined
- Aug 28, 2007
- Messages
- 36,176
Without being able to see the drive myself I couldn't really say. How big is the drive normally and what type of drive is it. Do you have anything else running that might be affecting it such as back-ups or large pagefiles?
Try this free partition tool as you may have more success:
http://www.paragon-software.com/home/pm-express/
Try this free partition tool as you may have more success:
http://www.paragon-software.com/home/pm-express/
gezafisch
New Member
- Joined
- Nov 18, 2014
- Messages
- 13
- Thread Author
-
- #6
Without being able to see the drive myself I couldn't really say. How big is the drive normally and what type of drive is it. Do you have anything else running that might be affecting it such as back-ups or large pagefiles?
Try this free partition tool as you may have more success:
http://www.paragon-software.com/home/pm-express/
The drive is a SATA 160 GB WD laptop hard drive. I don't think there are any back-up's and i'm not sure what a pagefile is. I am disabling System Restore and Pagefiles right now so I will tell you guys how that works out.
Thanks
Geza
whs
Extraordinary Member
- Joined
- Sep 17, 2009
- Messages
- 1,537
1. Before you do all thoe operations, make an image of your Vista system. If anything goes wrong, you can at least backpaddle.
http://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html?ltr=I
2. I think you would be much better off running the Windows 10 in a virtual partition. Here is a tutorial for Windows 8, but it works the same for 10.
http://www.eightforums.com/tutorials/2899-vmware-player-install-windows-8-a.html
3. Here is a tutorial on how to setup a dual boot Vista/8 - it should be the same for 10 although I have not yet tried that (I run 10 in virtual)
http://www.eightforums.com/tutorials/2344-dual-boot-installation-windows-8-windows-7-vista.html
http://www.sevenforums.com/tutorials/73828-imaging-free-macrium.html?ltr=I
2. I think you would be much better off running the Windows 10 in a virtual partition. Here is a tutorial for Windows 8, but it works the same for 10.
http://www.eightforums.com/tutorials/2899-vmware-player-install-windows-8-a.html
3. Here is a tutorial on how to setup a dual boot Vista/8 - it should be the same for 10 although I have not yet tried that (I run 10 in virtual)
http://www.eightforums.com/tutorials/2344-dual-boot-installation-windows-8-windows-7-vista.html
Similar threads
- Replies
- 0
- Views
- 54
- Replies
- 0
- Views
- 1K
- Replies
- 0
- Views
- 297
- Replies
- 0
- Views
- 179
- Article
- Replies
- 0
- Views
- 70