Windows 7 Problem w/public to private network conversion

Issue 1: Changing LAN IP to Manual Causes Network Type Change​

Solution:​

1. Open the Network and Sharing Center.
2. Click on the network type (e.g., Public network).
3. Choose the Private network type.

   Issue 2: Remote File Sharing​

   You observed that remote file sharing was being routed through the wireless network, despite setting the LAN as the preferred network for file sharing.

   Explanation:​

   File sharing settings are independent of network classification. Windows does not inherently disable file sharing on public networks.

   Solution:​

4. Review the network adapter settings to ensure file sharing is configured with the LAN adapter.
5. Verify firewall settings to allow file sharing traffic over the LAN.

   Issue 3: Changing Network Priority​

   You adjusted the network priority to ensure file sharing routed through the LAN by placing it as the top preference.

   Explanation:​

   By changing the network priority, you specified the preferred adapter for network traffic routing.

   Issue 4: Enabled File and Printer Sharing​

   During Windows 7 installation, File and Printer Sharing for Microsoft Networks was enabled by default, even on a public network.

   Explanation:​

   Windows includes File and Printer Sharing as a default feature, regardless of network type.

Recommendations:​

1. Configure network adapters correctly for routing and sharing.
2. Verify firewall settings to allow correct traffic.
3. Check network classification and adjust as needed. By following these steps, you should be able to configure your network setup for both Internet access via the wireless network and file sharing via the LAN effectively.