Yes as Elmer has indicated, you will likely need to bump your DDR3 Voltage a bit. Get in your BIOS setup utility and Under MB Intelligent Tweaker (M.I.T.) look for something called DDR3 Voltage. It is currently defaulting to 1.5 and you need to incrementally increase that until your build becomes stable. Try jumping it to 1.56 and test for a while if problems persist try 1.58 or 1.6, mine stabilized at 1.58. As I said you can do it incrementally starting with I believe 1.52 (your board may be different) and I wouldn't increase it past the point where it stabilizes (no need).
Good luck and
Let us know how that works out for you.
Regards
Randy