Windows 8 Samsung slate connects to wifi only with 8.11g and not with 8.11n

M

Massimo Nanetti

New Member
Joined
Apr 15, 2013
Messages
4
Hi everybody
I'd like to submit an annoying issue that concerns my Windows 8 Samsung XE700T1A.
I've just bought a new wifi access point, that is 8.11n compliant (300Mb).
The problem is that the tablet connect only in 8.11g (54Mb).
The wifi board is Qualcomm option gtm67x, and the driver has been released
on July 2002.
I'm wondering if it's a windows 8 issue or a slate issue.
Can anybody help me ?
Thanks in advace
Massimo
 
Sort by date Sort by votes
Is your device G on N compliant? According to the Samsung website, it is all wifi compliant. I also see that it came with windows 7 and not windows 8 and there is nothing from Samsung saying it's going to be either. The same for my Samsung RV511 laptop, even though I installed 8 on it, there were driver issues which forced me to remove 8 from the laptop and return to 7. So it's more likely a driver issue. Have you tried Qualcomm directly for a driver for windows 8? Also you could try running the windows 7 driver in compatibility modes and see if that works.
 
Upvote 0 Downvote
My laptop in the italian version of the slate, the XE700T1A-H01IT
I took form the Samsung site the following feature

[h=3]Rete (Network)[/h]
  • 802.11bg/n 1 x 1 WLAN
It came to me as a W7, but at that time I had an old G access point.
Then I updated it as a W8, but still with the old G access point.
Now, with W8 and new N access point I'm facing this issue.
Samsung doesn't support any W8 driver in its official site, but it releases
an application (something like "easy software manager") that does the job.
I'm confused....maybe your idea of going down to W7 driver in compatibility mode
does make sense.
I heard that a similar issue has been raised up by some Surface owners,
facing the same behaviour of the same wifi card and again, of course, with W8.
Have you ever heard anything similar ?

Anyway, thanks for the help.





[h=3][/h]
 
Upvote 0 Downvote
All right, thanks a lot.
The issue was caused by TKIP encryption. Now, with AES, I can reach 150Mb.
What do you suggest I can do to reach the theoretical 300Mb promised by 8.11n?
Really thanks for helping me
 
Upvote 0 Downvote
Not a thing...because it's theoretical, meaning in a perfect setup with perfect hardware, it's possible to achieve that magical 300mb connection speed.
 
Upvote 0 Downvote
You must log in or register to reply here.