Windows 7 Security Essentials + Windows Fire Wall = No Networking...

therock

Well-Known Member
Joined
Jun 25, 2011
Messages
24
I run Windows 7 and MSE and it suggests I enable my fire wall and when I do I loose networking and file sharing. I have a Comcast box and a Trendnet router. Do I need windows fire wall?
 
Solution
SUCCESS!!!!!!!!

I did some Googling and found a forum reply that said "The problem was resolved by importing a policy exported from a working Windows 7 computer.

So I went to one of my other PC's and looked and sure enough it had the FW on and could network and file share!
I exported its policy to the failing PC desktop (its fire wall was off). Went to that PC and in FW advance settings imported the policy.

BAM!!!!!!!!!!
Sort by date Sort by votes
It may be important as to what type of network your current connection is set to. When Windows 7 sees a new network initially it asks if its a Public, Home or Work network and applies different rules accordingly.
Go to Network and Sharing Center, what type of network is listed below your active network? If its not Home or Work, change it to be so. If that doesn't help, then click on Windows Firewall, then the Restore Defaults link.
 
Upvote 0 Downvote
Thanks, It on home. And I did select the recommended and it kills network and file sharing. I go in a set them up and save but they do not save.
 
Upvote 0 Downvote
Try the following commands in an elevated command prompt:
netsh firewall reset
netsh advfirewall reset
 
Upvote 0 Downvote
Thanks, I went to bed before the reply. When should I do the ECP? While MSE is running with the Firewall enable but failing my network sharing? In what state should I do it.
 
Upvote 0 Downvote
Should not matter when you do it, reboot and then see if file sharing works. Also there is one more place you can check your settings and that is under Network and Sharing Center, Change advanced sharing settings. Make sure file sharing is indeed turned on in there as well.
 
Upvote 0 Downvote
Firewall or not enables the options to allow are always there but when FW is enabled they allow me to select and save but do not save.


Here is what I got doing the elevated commands.
The 1st time was with FW disabled. the 2nd time was with FW disabled.

Thanks

 
Upvote 0 Downvote
I was involved with a thread just recently that seemed to have the exact same problem. Changing Advanced Sharing Settings would not stick.

It turned out many of the rules in the Windows Firewall that allowed such things as Network Discovery were missing so could not be changed. You might check the rules on the firewall and see if you have many (around 25) rules for Network Discovery. Some are for the private networks and some for public, etc. (fw.msc)

I never found out what actually removed the rules, but the poster imported the rules and repaired the problem.
 
Upvote 0 Downvote
I wish you could find that thread and help me get in contact with the poster or at least see what he posted he did.
Here is a screen shot of my rules window. I see a reset defaults. Kind of spooked to just try it.

Thanks
 

Attachments

  • Win7_Firewall_Rules.webp
    90.8 KB · Views: 416
Upvote 0 Downvote
SUCCESS!!!!!!!!

I did some Googling and found a forum reply that said "The problem was resolved by importing a policy exported from a working Windows 7 computer.

So I went to one of my other PC's and looked and sure enough it had the FW on and could network and file share!
I exported its policy to the failing PC desktop (its fire wall was off). Went to that PC and in FW advance settings imported the policy.

BAM!!!!!!!!!!
 
Upvote 0 Downvote
Solution
Hummm..

Anyway, you might also have been able to just restore the Default Policies.
 

Attachments

  • Firewall2.webp
    8.5 KB · Views: 397
Upvote 0 Downvote
No.......... I did not mention it but I tried that and got the same error as mentioned in that thread, when choosing to restore defaults It came back - Windows Firewall could not restore the default policy, error:3.

I cannot tell you the head banging I did before posting here and I did Google it but missed it until this evening.

So Happy.
 
Upvote 0 Downvote
It would be very good if you happen to know what removed the rules from the firewall. If you did not remove them, possibly some third party software or even virus type operation may have been responsible. I will see if I can find where the rules are kept, since it is possible that archive was corrupted. Maybe a System File Check could have helped.

I deleted all my Network discovery entries and used the Refresh and they came back. But I am currently in Windows 8.
 
Upvote 0 Downvote
It looks like they are kept in the following key. Possibly a registry cleaner might have removed some, if you had run one.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy
 
Upvote 0 Downvote
You must log in or register to reply here.

Similar threads

N
  • Solved
Windows 7 How to turn Windows Fire Wall Off?
Replies
2
Views
1K
Pauli
  • Solved
Windows 8 Security Essentials yes or no?
Replies
4
Views
2K
sirloyne
  • Solved
Windows 7 Windows Fire Wall
Replies
9
Views
6K
reghakr
C
  • Solved
Windows 7 No networking - new Windows 7 computer - TCP/IPv4 and TCP/IPv6 - Odd IPCONFIG results
Replies
2
Views
13K
kevin from Chi-town
VIDEO Free Anti-Virus: How to Install Microsoft Security Essentials (With Video)
Replies
1
Views
1K
ChatGPT